Service and Cost
Typical Cost
1. Parts Cost: - OEM Parts: These are typically more expensive and can range from $100 to $300 or more, depending on the vehicle. - Aftermarket Parts: These are usually less expensive, ranging from $50 to $150. 2. Labor Costs: - Labor costs can vary significantly based on the complexity of the replacement . Typically, labor can range from $50 to $150 per hour. The total labor time for replacing a blower motor can be between 1 to 3 hours, leading to a labor cost of approximately $50 to $450. 3. Total Cost: - On average, the total cost for blower motor replacement, including both parts and labor, can range from $150 to $600. However, for luxury or more complex vehicles, the cost could be higher.
4. Repair vs. Replacement: - In some cases, the blower motor may only need a minor repair, such as cleaning or replacing a resistor, which can be significantly cheaper, often under $100.
Typical Service Procedure
1. Diagnosis: Before any replacement or repair, a thorough diagnosis is performed to confirm that the blower motor is the source of the problem. This may involve checking for electrical issues, such as blown fuses or faulty wiring, and ensuring that the problem isn't with the blower motor resistor or control switch.
2. Removal of the Old Blower Motor: This involves accessing the blower motor, which is usually located under the dashboard on the passenger side or in the engine compartment. The process may require removing panels, the glove box, or other components to reach the motor.
3. Inspection of Related Components: Once the blower motor is accessible, related components such as the blower motor resistor, wiring harness, and connectors are inspected for damage or wear. If these parts are faulty, they may also need to be replaced.
4. Replacement of the Blower Motor: The old blower motor is removed, and a new one is installed. This includes ensuring that the new motor is properly aligned and secured, and that all electrical connections are correctly reattached.
5. Testing: After installation, the blower motor is tested to ensure it operates correctly at all speed settings. This includes checking for proper airflow and listening for any unusual noises that might indicate a problem.
6. Reassembly: Once testing is complete, any panels or components that were removed to access the blower motor are reinstalled.
7. Final Inspection: A final inspection is conducted to ensure everything is in place and functioning as expected. This may include a test drive to confirm that the HVAC system is working properly.
8. Warranty and Documentation: The service may include a warranty on the parts and labor, and documentation of the work performed is usually provided to the vehicle owner.These steps ensure that the blower motor replacement is done correctly and that the vehicle's heating and cooling system operates efficiently.
What is a Blower Motor and What Does It Do?
A blower is made up an electric motor and a blower wheel. When energized, the motor spins the blower wheel. This pushes air through your vehicle's ventilation system and into the passenger cabin.
Signs of a bad Blower Motor
The blower motor is a crucial component of a vehicle's HVAC (heating, ventilation, and air conditioning) system, responsible for circulating air through the vents. When it begins to fail, there are several signs that can indicate the need for replacement:
1. Weak Airflow: One of the most common signs of a failing blower motor is weak or reduced airflow from the vents, even when the fan is set to high. This can be due to the motor losing power or efficiency.
2. No Airflow: If the blower motor fails completely, you may experience no airflow from the vents at all, regardless of the fan speed setting.
3. Unusual Noises: A failing blower motor may produce unusual noises such as rattling, grinding, or squealing. These sounds can indicate worn-out bearings or debris caught in the motor.
4. Inconsistent Airflow: If the airflow is inconsistent, fluctuating between strong and weak, it could be a sign of a failing blower motor or an issue with the electrical connections.
5. Overheating: A blower motor that is overheating may emit a burning smell. This can be due to electrical issues or the motor working harder than it should.
6. Blower Motor Only Works at Certain Speeds: If the blower motor only works at certain speeds, it could be a sign of a failing motor or a problem with the blower motor resistor.
7. Smoke or Burning Smell: Any smoke or burning smell coming from the vents can indicate a serious issue with the blower motor, such as electrical failure or overheating.
8. Blown Fuses: Frequent blowing of fuses related to the HVAC system can be a sign of an electrical problem with the blower motor.If you notice any of these signs, it is important to have the blower motor inspected and, if necessary, replaced by a qualified mechanic to ensure the proper functioning of your vehicle's HVAC system.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
