ABS System Inspection and Service Costs
Basic ABS System Scan
Cost: $125 (1 hour)
Includes diagnostic scan, code reading, and basic system evaluation. This is the starting point for identifying ABS issues.
ABS Sensor Inspection and Testing
Cost: $125-$250 (1-2 hours)
Includes testing of individual wheel sensors, wiring inspection, and sensor cleaning. Additional costs may apply if sensors need replacement.
ABS Module Testing
Cost: $187.50 (1.5 hours)
Comprehensive testing of the ABS control module, including communication tests and system response evaluation.
Complete ABS System Inspection
Cost: $312.50 (2.5 hours)
Includes full system diagnostic, hydraulic pressure testing, all sensor testing, module evaluation, and brake line inspection.
ABS Hydraulic Unit Inspection
Cost: $250 (2 hours)
Testing of hydraulic unit operation, pressure testing, and solenoid function verification.
Note: These prices reflect labor costs only. Additional parts and materials will be quoted separately if needed. Some vehicles may require more time due to complexity or accessibility issues.
Emergency ABS Inspection
Cost: $187.50 (1.5 hours)
Rapid diagnostic service for vehicles with active ABS warning lights or immediate system concerns.
*All prices are based on our standard labor rate of $125/hour. Actual costs may vary depending on vehicle make, model, and condition.
Anti-lock Brake System (ABS) Inspection Procedures
1. Visual Inspection
Steps:
- Check for visible damage to ABS sensors, wiring, and connectors
- Inspect ABS module for physical damage or corrosion
- Examine brake lines connected to the ABS unit for leaks or damage
- Check wheel speed sensor mounting and cleanliness
2. Electronic Diagnostic Scan
Steps:
- Connect professional-grade diagnostic scanner to vehicle's OBD-II port
- Retrieve and document any stored ABS trouble codes
- Review live data streams from wheel speed sensors
- Perform system self-test if available
3. Wheel Speed Sensor Testing
Steps:
- Measure sensor resistance with multimeter
- Check sensor output voltage while rotating wheel
- Clean sensor and mounting location if necessary
- Verify proper air gap between sensor and tone ring
4. Hydraulic System Check
Steps:
- Inspect brake fluid level and condition
- Check for proper hydraulic pressure at each wheel
- Test ABS pump operation
- Verify solenoid valve function
5. Road Test Verification
Steps:
- Perform controlled brake tests at various speeds
- Listen for abnormal ABS pump operation
- Verify ABS activation on different road surfaces
- Confirm proper brake pedal feedback during ABS activation
Note:All ABS inspections should be performed by certified technicians using proper diagnostic equipment and following manufacturer-specific procedures.
6. System Bleeding (If Required)
Steps:
- Connect scan tool to activate ABS pump
- Bleed brake system following manufacturer's sequence
- Verify proper brake pedal feel
- Confirm no air remains in system
Regular ABS inspection and maintenance are crucial for ensuring your vehicle's safety systems operate correctly. If you notice any ABS warning lights or unusual brake behavior, please schedule an inspection immediately.
Understanding Anti-lock Brake System (ABS) Inspection
An Anti-lock Brake System (ABS) inspection is a comprehensive diagnostic check of your vehicle's anti-lock braking system, which is crucial for maintaining safe braking performance, especially during emergency situations.
What is Included in an ABS Inspection
During an ABS inspection, technicians will examine several key components:
- ABS Module Check:Testing the main control unit that manages the entire system
- Wheel Speed Sensors:Inspecting sensors that monitor wheel rotation speeds
- Hydraulic Unit:Examining the unit that controls brake fluid pressure
- Warning Light Diagnostics:Analyzing any ABS warning light issues
- Wiring and Connections:Checking for any damaged or loose electrical connections
Why is ABS Inspection Important
Regular ABS inspections are vital because they:
- Ensure Safety:Confirm your vehicle can prevent wheel lock-up during hard braking
- Prevent Failures:Identify potential issues before they become serious problems
- Maintain Performance:Keep your braking system operating at optimal efficiency
- Save Money:Catch small issues before they develop into costly repairs
When Should You Get an ABS Inspection
You should have your ABS inspected:
- When your ABS warning light comes on
- During regular brake maintenance
- If you notice unusual braking behavior
- At least once a year as preventive maintenance
Note:Regular ABS inspections are particularly important in areas with frequent rain or snow, where anti-lock braking systems are more likely to be engaged.
Common Failure Symptoms of ABS: Warning Signs and Indicators
Anti-lock Brake System (ABS) Inspection Guide
Visual Inspection of ABS Components
Signs of Failure:
- Illuminated ABS warning light on dashboard
- Damaged or corroded wiring harnesses
- Cracked or damaged wheel speed sensors
- Visible fluid leaks around the ABS module
- Corroded or damaged tone rings
Service Schedule: Visual inspection recommended annually or every 12,000 miles
ABS Module Testing
Signs of Failure:
- Brake pedal pulsation during normal braking
- ABS activating at inappropriate times
- Strange noises during ABS activation
- Complete ABS system failure
Service Schedule: Electronic diagnostic testing recommended every 2 years or when warning lights appear
Wheel Speed Sensor Check
Signs of Failure:
- Erratic speedometer readings
- Traction control system malfunctions
- ABS engaging at low speeds
- Poor brake performance
Service Schedule: Sensor testing recommended every 30,000 miles or when ABS issues occur
Hydraulic System Inspection
Signs of Failure:
- Soft or spongy brake pedal
- Visible brake fluid leaks
- Contaminated brake fluid
- Unusual brake noise or vibration
Service Schedule: Brake fluid should be tested every 2 years or 24,000 miles, with replacement as needed
Note: These are general guidelines. Always consult your vehicle's owner's manual for specific maintenance schedules and follow manufacturer recommendations.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
