Brake Caliper Carrier Repair Service Costs
Basic Caliper Carrier Service
Includes inspection, cleaning, and lubrication of sliding pins and surfaces
Labor Time: 0.5-1 hour
Estimated Cost: $62.50-$125
Caliper Carrier Replacement (Single Side)
Includes removal of old carrier, installation of new carrier, and brake system check
Labor Time: 1-1.5 hours
Estimated Cost: $125-$187.50
Note: Parts cost additional, typically $50-$150 per carrier
Complete Caliper Carrier Replacement (Both Sides)
Includes replacement of both carriers, system bleeding, and brake check
Labor Time: 2-2.5 hours
Estimated Cost: $250-$312.50
Note: Parts cost additional, typically $100-$300 for both carriers
Caliper Carrier Repair with Brake Service
Includes carrier service/replacement, brake pad replacement, and rotor inspection
Labor Time: 2-3 hours
Estimated Cost: $250-$375
Note: Additional parts costs may apply
*All prices are estimates based on our standard labor rate of $125/hour. Actual costs may vary depending on vehicle make, model, and condition. Additional parts costs not included in labor estimates.
Brake Caliper Carrier Repair Procedures
Fixed Brake Caliper Carrier
Step 1:Safely lift and support the vehicle, remove the wheel
Step 2:Remove brake pads and wear sensors if present
Step 3:Disconnect brake line and cap to prevent fluid loss
Step 4:Remove mounting bolts securing the caliper to the carrier
Step 5:Remove carrier mounting bolts from the steering knuckle
Step 6:Clean mounting surfaces and inspect for damage
Step 7:Install new carrier using new mounting bolts to proper torque specifications
Step 8:Reinstall caliper, brake pads, and reconnect brake line
Step 9:Bleed brake system and test operation
Floating Brake Caliper Carrier
Step 1:Safely lift and support the vehicle, remove the wheel
Step 2:Remove brake pads and wear indicators
Step 3:Check sliding pins for proper movement and wear
Step 4:Remove sliding pin boots and clean or replace as needed
Step 5:Remove carrier mounting bolts from knuckle
Step 6:Clean mounting surfaces thoroughly
Step 7:Install new carrier with new mounting bolts to specified torque
Step 8:Lubricate and install sliding pins with new boots
Step 9:Reinstall brake pads and test caliper movement
Swing Brake Caliper Carrier
Step 1:Safely lift and support the vehicle, remove the wheel
Step 2:Remove brake pads and springs
Step 3:Check pivot points for wear and damage
Step 4:Remove carrier mounting bolts
Step 5:Clean all mounting surfaces and pivot points
Step 6:Install new carrier using new mounting hardware
Step 7:Lubricate pivot points as specified
Step 8:Reinstall brake pads and springs
Step 9:Check for proper swing operation
Important Notes:
- Always refer to manufacturer specifications for proper torque values
- Use only approved brake lubricants
- Replace any damaged or worn components
- Perform a thorough brake test before returning vehicle to service
Understanding Brake Caliper Carriers
ABrake Caliper Carrier, also known as a caliper bracket or caliper mounting bracket, is a crucial component of your vehicle's disc brake system. It serves as the mounting point that securely holds the brake caliper in the correct position relative to the brake rotor.
What Does a Brake Caliper Carrier Do
The brake caliper carrier performs several essential functions:
- Support and Stability:It provides a stable mounting platform for the brake caliper, ensuring it remains properly aligned with the brake rotor.
- Guide System:Contains guide pins or sliding mechanisms that allow the caliper to move smoothly when the brakes are applied and released.
- Load Distribution:Helps distribute braking forces evenly across the brake system components.
- Positioning:Maintains the correct spacing between the brake pads and the rotor when the brakes are not engaged.
Why is it Important
A properly functioning brake caliper carrier is essential for:
- Even brake pad wear
- Optimal braking performance
- Prevention of brake noise and vibration
- Overall brake system safety
Note: If you notice uneven brake pad wear, squealing brakes, or vibration during braking, your brake caliper carrier might need inspection or replacement.
Common Failure Symptoms of Brake Caliper Carriers: Warning Signs and Indicators
Brake Caliper Carrier Maintenance and Failure Signs
Fixed Caliper Carrier
- No specific service schedule, but inspect during brake pad replacement
- Signs of failure include:
- Visible cracks or damage
- Corroded mounting points
- Loose or worn mounting bolts
- Uneven brake pad wear
Floating Caliper Carrier
- Service recommended every 30,000-50,000 miles
- Signs of failure include:
- Sticking or seized caliper slides
- Squealing or grinding noises
- Uneven brake pad wear
- Brake drag
- Rusty or damaged slide pins
Sliding Caliper Carrier
- Inspect and lubricate guide pins every brake service
- Signs of failure include:
- Restricted caliper movement
- Contaminated or dried guide pin lubricant
- Corroded guide pin bores
- Uneven brake pad wear
- Pulling to one side during braking
Note: Regular inspection of brake caliper carriers during routine brake maintenance is essential for safety and optimal brake performance. If you notice any of these signs, consult a professional mechanic immediately.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
