Crankcase Vent Hose Repair

Don't Let a Faulty Crankcase Vent Hose Lead to Engine Damage

Is your check engine light on Notice oil leaks or poor engine performance Your crankcase vent hose might be the culprit. Don't wait until it's too late!

Why Choose Us:
  • Industry-Leading 24-Month/24,000-Mile Warranty
  • ASE-Certified Master Mechanics
  • All Makes and Models Serviced
  • Same-Day Service Available

Protect your engine and restore your vehicle's performance with our professional crankcase vent hose repair service.

Crankcase Vent Hose Repair Cost Guide

Below are typical repair costs for various crankcase vent hose services at our shop rate of $125/hour:

Basic Crankcase Vent Hose Replacement

Labor Time:0.5-1 hour
Labor Cost:$62.50-$125
Parts Cost:$20-$50
Total Estimated Cost:$82.50-$175

Complex Crankcase Vent System Service

Labor Time:1.5-2.5 hours
Labor Cost:$187.50-$312.50
Parts Cost:$50-$150
Total Estimated Cost:$237.50-$462.50

Complete PCV System Overhaul

Labor Time:2-3 hours
Labor Cost:$250-$375
Parts Cost:$100-$300
Total Estimated Cost:$350-$675

Note: Prices may vary depending on vehicle make/model and any additional repairs needed. These are estimated ranges based on typical scenarios.

Additional Considerations:

  • Luxury and European vehicles may have higher parts costs
  • Additional seals or gaskets might be required
  • Diagnostic time may be needed for complex issues
  • Some vehicles require removal of other components for access

Crankcase Vent Hose Repair Procedures

Upper Crankcase Vent Hose

Typical repair steps:

  1. Allow engine to cool completely before beginning work
  2. Locate the upper crankcase vent hose connecting the valve cover to the intake manifold
  3. Remove engine cover if necessary to access the hose
  4. Loosen or remove clamps on both ends of the hose
  5. Carefully pull the old hose free from both connection points
  6. Inspect connection points for damage or debris
  7. Install new hose, ensuring proper routing and clearance from hot surfaces
  8. Secure with new clamps at both ends
  9. Replace engine cover if removed
  10. Start engine and check for proper sealing

Lower Crankcase Vent Hose

Typical repair steps:

  1. Ensure engine is cool and safe to work on
  2. Raise vehicle using appropriate lift or jack stands
  3. Locate the lower crankcase vent hose (usually connects to oil separator)
  4. Remove any shields or covers blocking access
  5. Remove retaining clips or clamps securing the hose
  6. Disconnect hose from both connection points
  7. Clean mounting surfaces thoroughly
  8. Install new hose, ensuring proper routing
  9. Secure with new clips or clamps
  10. Reinstall any removed shields or covers
  11. Lower vehicle
  12. Start engine and check for leaks

Important Notes:

  • Always use OEM or high-quality replacement hoses
  • Replace any damaged clamps or clips during repair
  • Check surrounding components for oil contamination
  • Consider replacing both upper and lower hoses at the same time
  • Inspect PCV valve while performing this repair

Note: Specific steps may vary depending on vehicle make and model. Always consult your vehicle's service manual for exact procedures.

Understanding Crankcase Vent Hoses

crankcase-vent-hose.webp

ACrankcase Vent Hose, also known as a PCV (Positive Crankcase Ventilation) hose, is a crucial component of your vehicle's engine ventilation system. This rubber or plastic hose connects the engine's crankcase to the intake manifold, playing a vital role in maintaining proper engine operation and environmental compliance.

What Does a Crankcase Vent Hose Do

The Crankcase Vent Hose serves several important functions:

  • Pressure Regulation:It helps regulate pressure within the engine's crankcase by allowing gases to escape in a controlled manner.
  • Blow-by Gas Management:During engine operation, some combustion gases leak past the piston rings into the crankcase (known as blow-by). The vent hose redirects these gases back into the intake system for re-burning.
  • Oil Vapor Control:It prevents oil vapors from escaping into the atmosphere, helping reduce environmental pollution.
  • Engine Protection:By maintaining proper crankcase pressure, it helps prevent oil leaks and protects engine seals.

Signs of a Failing Crankcase Vent Hose

Common symptoms of a deteriorating vent hose include:

  • Increased engine oil consumption
  • Oil leaks around engine seals
  • Rough idle or poor engine performance
  • Check Engine light illumination
  • Visible cracks or damage to the hose

Regular inspection and maintenance of your Crankcase Vent Hose can prevent engine problems and ensure optimal vehicle performance.

Common Failure Symptoms of Crankcase Vent Hose

Crankcase Vent Hose: Signs of Failure & Maintenance Guide

Signs of Crankcase Vent Hose Failure:

  • Oil leaks around the valve cover or hose connections
  • Excessive engine smoke, particularly at idle
  • Rough idle or unstable engine performance
  • Check Engine light illumination
  • Visible cracks, hardening, or deterioration of the hose
  • Oil residue inside the engine bay
  • Whistling or hissing sounds from the engine
  • Increased oil consumption

Typical Service Schedule:

  • Visual inspection every 30,000 miles or during routine oil changes
  • Replacement typically recommended every 50,000 to 70,000 miles
  • Earlier replacement may be needed in vehicles frequently driven in:
    • Extreme temperatures
    • Stop-and-go traffic
    • Dusty conditions

Important Note: Maintenance schedules can vary significantly between vehicle manufacturers and models. Always consult your vehicle's owner's manual for specific maintenance intervals.

Regular inspection and timely replacement of your crankcase vent hose can prevent more serious engine issues and expensive repairs down the road.

How It Works

  • Get a quote online or set-up a time to have your vehicle looked at.
  • Pick time slots that work for you, easily, online.
  • We will confirm appointments and send reminders.
  • Our mechanics bring everything that is needed to you.
  • All you have to do is provided a safe area for the work to be performed.

What we need from you

  • A safe place to work on your vehicle
  • No working on the side of busy roads
  • No working on unstable or steep surfaces.
  • We do not perform repairs during severe weather.
  • Authorization from a property owner or management.
  • Repair work done in a parking lot or at your  requires permission.
  • We do not do repairs in areas restricted by law.

Common Questions

Service Area

Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville,  Kentwood, Walker, and Wyoming

Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.

Contact us if you have any questions about where we provide services.

What our customers say: