Automatic Shutdown Relay (ASR) Repair Service Costs
Below are the typical repair costs for various Automatic Shutdown Relay services. All prices are calculated based on our standard labor rate of $125/hour.
Basic ASR Diagnostic and TestingInitial diagnosis and testing of the ASR system typically takes 1-1.5 hours.
Estimated Cost: $125-$187.50
ASR ReplacementComplete replacement of the ASR unit, including removal of old unit and installation of new one, typically takes 2-3 hours.
Estimated Cost: $250-$375 (labor only, parts additional)
ASR Wiring RepairRepair of damaged or corroded wiring typically takes 2-4 hours, depending on the extent of damage.
Estimated Cost: $250-$500
ASR System Programming/ResetReprogramming or resetting the ASR system typically takes 1 hour.
Estimated Cost: $125
Please note: These are estimated costs for labor only. Additional parts or materials will be charged separately. Actual costs may vary depending on the specific make and model of your vehicle and the extent of repairs needed.
All repairs include:
- Complete system diagnostic
- Professional installation
- Post-repair testing
- 90-day labor warranty
The Automatic Shutdown (ASD) Relay is a critical component in many vehicles, particularly those with fuel injection systems. It is responsible for controlling the power supply to essential components such as the fuel pump, ignition coils, and injectors. When dealing with the replacement or repair of an ASD relay, several key aspects are typically considered:
1. Diagnosis:A thorough diagnosis is necessary to confirm that the relay is indeed the source of the problem. This involves checking for error codes using an OBD-II scanner, testing the relay with a multimeter, and inspecting related wiring and connectors for damage or corrosion.
2. Replacement Relay:If the ASD relay is found to be faulty, a replacement relay will be required. We use relays that match the specifications of the original part to ensure proper functionality. This includes matching the electrical ratings and physical dimensions.
3. Installation:The installation process involves removing the old relay and installing the new one. This typically requires locating the relay in the vehicle's fuse box or relay panel, which is often under the hood or in the cabin. Our technicians take care to ensure that the new relay is seated properly and that all connections are secure.
4. Testing:After installation, we thoroughly test the system to ensure that the new relay is functioning correctly. This involves starting the vehicle and checking that the engine runs smoothly without stalling, and that there are no warning lights on the dashboard related to the fuel or ignition systems.
5. Inspection of Related Components:Our comprehensive service includes inspecting related components such as the fuel pump, ignition coils, and wiring harnesses for any signs of wear or damage. This helps prevent future issues and ensures the longevity of the new relay.
6. Documentation:We maintain detailed records of all repairs and replacements, including the date, part number, and any observations made during the process, which helps us provide consistent, high-quality service. By following these steps, we ensure that ASD relay replacements and repairs are performed effectively, keeping your vehicle's engine management system operating reliably.
What is a Automatic Shutdown Relay and what does it do
The Automatic Shutdown (ASD) Relay is an important component in many modern vehicles, particularly those with fuel-injected engines. Its primary function is to control the power supply to engine components, ensuring that the engine can be safely and efficiently started and stopped. Here’s a more detailed explanation of its role and operation:
1. Function:The ASD relay is responsible for supplying power to the ignition coils and the fuel injectors. It also often powers the oxygen sensor heater elements and other engine management components. By controlling these systems, the ASD relay plays a crucial role in the engine's ability to start and run.
2. Operation:When you turn the ignition key to the "ON" position, the vehicle's Engine Control Unit (ECU) sends a signal to activate the ASD relay. This allows electrical current to flow to the necessary components, enabling the engine to start and run. If the ECU detects a problem, such as a lack of signal from the crankshaft position sensor, it will deactivate the ASD relay to prevent the engine from running, which is a safety feature to prevent damage.
3. Safety and Shutdown:The ASD relay is designed to shut down the engine in the event of a failure. For example, if the ECU detects a loss of signal from the crankshaft or camshaft position sensors, it will cut power via the ASD relay to prevent potential engine damage or unsafe operating conditions.
4. Symptoms of Failure:If the ASD relay fails, the vehicle may experience a no-start condition, stalling, or intermittent engine operation. Diagnosing a faulty ASD relay typically involves checking for power at the relay and ensuring that the ECU is sending the correct signals.
5. Location:The ASD relay is usually located in the vehicle's fuse box or power distribution center, which is often found under the hood. Its exact location can vary depending on the make and model of the vehicle.Understanding the role of the ASD relay can help in diagnosing engine start and run issues, as it is a component in the vehicle's electrical and engine management systems.
How do I know I need to replace my Automatic Shutdown Relay
Common Signs of ASR (Automatic Shutdown Relay) Failure & Maintenance Guide
Mechanical ASR
Signs of Failure:
- Visible wear on mechanical components
- Delayed response to shutdown signals
- Sticking or binding of moving parts
- Audible clicking without shutdown activation
Service Schedule:
- Visual inspection every 6 months
- Full mechanical test annually
- Replace worn components every 2-3 years
- Complete replacement recommended after 5-7 years
Electronic ASR
Signs of Failure:
- Error codes on display panel
- Intermittent operation
- Failed self-diagnostic tests
- No response to shutdown signals
- LED indicators not functioning properly
Service Schedule:
- Monthly self-diagnostic test
- Calibration check every 12 months
- Software updates as recommended by manufacturer
- Complete replacement every 8-10 years
Solid State ASR
Signs of Failure:
- Overheating of components
- Random triggering of shutdown sequence
- Loss of programmed settings
- Communication errors with control systems
Service Schedule:
- Quarterly performance testing
- Annual thermal imaging inspection
- Circuit board cleaning every 18 months
- Replacement recommended after 10-12 years
Note: Actual service intervals may vary based on manufacturer specifications and operating conditions. Always consult your equipment manual for specific maintenance requirements.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
