Brake Pedal Position Switch Repair Costs
Basic Switch Replacement
Labor: 0.5-1 hour ($62.50-$125)
Parts: $30-$75
Total Estimated Cost: $92.50-$200
Cruise Control Switch Assembly
Labor: 1-1.5 hours ($125-$187.50)
Parts: $75-$150
Total Estimated Cost: $200-$337.50
Stop Light Switch
Labor: 0.5-1 hour ($62.50-$125)
Parts: $20-$50
Total Estimated Cost: $82.50-$175
Integrated Brake Position Sensor
Labor: 1.5-2 hours ($187.50-$250)
Parts: $150-$300
Total Estimated Cost: $337.50-$550
Note: Prices may vary depending on vehicle make, model, and year. Additional costs may apply if related components need replacement. All estimates include our standard labor rate of $125/hour.
Additional Considerations:
- Diagnostic fee may apply if extensive testing is required
- OEM parts typically cost more than aftermarket alternatives
- Some luxury vehicles may require specialized tools or procedures
- Warranty coverage may be available for certain repairs
Brake Pedal Position Switch Repair Procedures
Mechanical Brake Light Switch
Tools needed:Basic hand tools, multimeter
Repair steps:
- Locate the switch near the brake pedal assembly under the dashboard
- Disconnect the negative battery terminal
- Unplug the electrical connector from the switch
- Remove mounting hardware securing the switch to the brake pedal bracket
- Install new switch in reverse order, ensuring proper adjustment
- Verify brake lights function correctly
Average repair time:30-45 minutes
Electronic Brake Light Switch
Tools needed:Diagnostic scanner, basic hand tools, multimeter
Repair steps:
- Connect diagnostic scanner to verify switch failure
- Disconnect vehicle battery
- Remove lower dash panel for access
- Disconnect electrical connectors from switch
- Remove switch mounting hardware
- Install new switch and reconnect wiring
- Use scanner to calibrate new switch (if required)
- Test brake lights and cruise control functions
Average repair time:1-1.5 hours
Brake Fluid Level Switch
Tools needed:Basic hand tools, brake fluid
Repair steps:
- Locate switch on brake fluid reservoir
- Clean area around switch to prevent contamination
- Disconnect electrical connector
- Remove switch from reservoir (may require draining some fluid)
- Install new switch with new sealing washer if required
- Refill brake fluid to proper level
- Test warning light operation
Average repair time:30 minutes
Important Notes:
Safety Warning:Always ensure proper switch adjustment and function before returning vehicle to service. Improper installation can affect brake light operation and vehicle safety systems.
Professional Recommendation:While these repairs can be performed by experienced DIY mechanics, we recommend professional installation due to the safety-critical nature of brake systems and the potential need for specialized diagnostic equipment.
Understanding Brake Pedal Position Switches
Normally Open (NO) Brake Pedal Position Switch
A Normally Open Brake Pedal Position Switch is an electrical switch that remains in an open (disconnected) state when the brake pedal is at rest. When the driver presses the brake pedal, the switch closes, completing an electrical circuit. This type of switch is commonly used to activate brake lights and inform various vehicle systems (like cruise control and electronic stability control) that the brakes are being applied.
Normally Closed (NC) Brake Pedal Position Switch
A Normally Closed Brake Pedal Position Switch maintains a closed (connected) circuit when the brake pedal is at rest. When the brake pedal is pressed, the switch opens, breaking the circuit. This type of switch is often used in conjunction with NO switches in modern vehicles for redundancy and safety purposes, particularly in systems like cruise control deactivation.
Dual Function Brake Pedal Position Switch
A Dual Function Brake Pedal Position Switch combines both NO and NC switches in a single unit. This design provides enhanced safety and functionality by allowing one switch to perform multiple tasks simultaneously. For example, one circuit can activate the brake lights while another deactivates the cruise control system when the brake pedal is pressed.
Electronic Brake Pedal Position Switch
An Electronic Brake Pedal Position Switch uses electronic sensors rather than mechanical contacts to detect brake pedal movement. These switches provide more precise data about pedal position and pressure, making them ideal for modern vehicles with advanced driver assistance systems (ADAS) and electronic brake force distribution systems.
Adjustable Brake Pedal Position Switch
An Adjustable Brake Pedal Position Switch allows for fine-tuning of the activation point. This type of switch can be calibrated to activate at specific pedal positions, making it particularly useful in custom applications or when precise brake light activation timing is required.
Note: All brake pedal position switches are crucial safety components that should be regularly inspected and maintained to ensure proper vehicle operation and safety.
Common Failure Symptoms of the Brake Pedal Position Switch
Brake Pedal Position Switch: Signs of Failure & Maintenance Guide
Mechanical Brake Light Switch
Signs of Failure:
- Brake lights stay on continuously
- Brake lights don't illuminate when pressing brake pedal
- Intermittent brake light operation
- Cruise control system stops working
Service Schedule: No specific replacement interval; inspect during regular brake service (typically every 30,000 miles) or when symptoms occur.
Electronic Brake Light Switch
Signs of Failure:
- Check Engine or ABS warning light illumination
- Cruise control malfunction
- Transmission won't shift out of park
- Erratic brake light operation
- Vehicle stability control system issues
Service Schedule: Generally designed to last the vehicle's lifetime but should be tested during routine electrical system diagnostics (every 60,000 miles recommended).
Hydraulic Brake Light Switch
Signs of Failure:
- Brake fluid leaks around switch
- Inconsistent brake light operation
- Low brake fluid warnings
- Brake warning light on dashboard
Service Schedule: Inspect during brake fluid changes (typically every 2-3 years) and replace if any signs of fluid seepage are present.
Note: These are general guidelines. Always consult your vehicle's owner's manual for specific maintenance schedules and follow manufacturer recommendations.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
