150,000 Mile Service Maintenance Costs
At the 150,000-mile mark, your vehicle requires several important maintenance services. Here's a detailed breakdown of typical costs based on our shop rate of $125/hour:
Oil and Filter ChangeLabor: 0.5 hours ($62.50)
Parts: $35-50
Total: $97.50-112.50
Labor: 1.5 hours ($187.50)
Parts/Fluid: $120-150
Total: $307.50-337.50
Labor: 1-2 hours ($125-250)
Parts: $60-120
Total: $185-370
Labor: 4-6 hours ($500-750)
Parts: $150-300
Total: $650-1,050
Labor: 1 hour ($125)
Parts/Fluid: $50-75
Total: $175-200
Labor: 1 hour ($125)
Parts/Fluid: $30-50
Total: $155-175
Labor: 0.5 hours ($62.50)
Parts: $40-60
Total: $102.50-122.50
Labor: 1 hour ($125)
Total: $125
Estimated Total Cost Range: $1,797.50 - $2,492.50
Note: Prices may vary depending on vehicle make, model, and condition. Additional repairs may be recommended based on inspection findings. All prices are estimates based on our shop rate of $125/hour.
Additional Services That May Be Recommended:
- Power steering fluid flush
- Serpentine belt replacement
- Wheel alignment
- Battery replacement
- Tire rotation and balance
Contact us for a detailed quote specific to your vehicle's make and model.
150,000 Mile Scheduled Maintenance Procedures
At the 150,000-mile mark, your vehicle requires comprehensive maintenance to ensure continued reliability and performance. Here's what typically happens during this important service:
Engine Services
- Oil and Filter Change:
Fresh synthetic oil is added after draining old oil, and a new filter is installed to ensure proper engine lubrication.
- Timing Belt Replacement:
If not already done, the timing belt is replaced to prevent potential engine damage. This includes inspecting related components like tensioners and pulleys.
Fluid Services
- Transmission Fluid:
Complete transmission fluid flush and replacement to maintain smooth gear operation.
- Coolant System:
Cooling system is flushed and refilled with fresh coolant to prevent corrosion and maintain proper engine temperature.
- Brake Fluid:
Complete brake fluid flush to remove moisture and contaminants from the system.
Brake System
- Brake Inspection:
Thorough inspection of brake pads, rotors, and calipers. Components are replaced if worn beyond specifications.
Suspension and Steering
- Component Inspection:
Detailed inspection of all suspension components, including:
- Ball joints
- Control arms
- Tie rod ends
- Struts/shocks
Additional Services
- Spark Plug Replacement:
Installation of new spark plugs to maintain proper engine performance.
- Air Filters:
Replacement of engine and cabin air filters to ensure clean air flow.
- Battery Service:
Battery load test and terminal cleaning to ensure reliable starting.
- Tire Service:
Rotation, balance, and alignment check to ensure even wear and proper handling.
Final Steps
- Multi-Point Inspection:
Comprehensive vehicle inspection including:
- All exterior lights
- Windshield wipers
- Belt conditions
- Hose integrity
- Road Test:
Final road test to ensure all systems are functioning properly after service.
Note: Specific maintenance requirements may vary by vehicle make and model. Please consult your owner's manual or speak with our service advisors for your vehicle's specific needs.
Why would I need a 150,000 Mile Scheduled Maintenance
The 150,000-mile maintenance service is a crucial milestone in your vehicle's life that helps ensure its continued reliability and performance. This comprehensive service addresses wear and tear on major components that typically occur around this mileage point.
What's Included in 150,000 Mile Maintenance:
Engine Services
- Timing Belt Replacement:If not already done, many vehicles require timing belt replacement to prevent engine failure
- Spark Plug Replacement:Fresh spark plugs ensure optimal engine performance and fuel efficiency
- Engine Air Filter:Replacement to maintain proper airflow and engine protection
Fluid Services
- Transmission Fluid:Complete flush and replacement to protect transmission components
- Coolant System:Flush and refill to prevent corrosion and maintain proper engine temperature
- Brake Fluid:Complete flush and replacement to ensure proper brake performance
- Power Steering Fluid:Flush and replacement if needed
Brake System
- Brake Inspection:Thorough check of all brake components
- Brake Pad Replacement:If needed, based on wear
- Brake Rotor Inspection:Check for wear and resurfacing if required
Additional Services
- Suspension Check:Inspection of all suspension components
- Belt Inspection:Check and replace worn drive belts
- Tire Rotation:Ensure even wear and proper alignment
- Battery Test:Check battery health and charging system
Why It's Important:Regular maintenance at 150,000 miles helps:
- Prevent costly repairs
- Maintain vehicle reliability
- Preserve resale value
- Ensure safety on the road
- Optimize fuel efficiency
Note: Specific maintenance requirements may vary by vehicle make and model. Please consult your owner's manual or speak with our service advisors for your vehicle's specific needs.
Schedule your 150,000-mile maintenance service today to keep your vehicle running smoothly for the next 150,000 miles!
150,000 Mile Maintenance Guide
Engine Services
Timing Belt Replacement
Signs of failure: Engine misfiring, ticking noise, engine won't turn over
Schedule: Typically needed between 60,000-100,000 miles, critical by 150,000
Spark Plug Replacement
Signs of failure: Poor acceleration, rough idling, increased fuel consumption
Schedule: Replace every 100,000 miles for platinum plugs, sooner for standard
Fluid Services
Transmission Fluid Change
Signs of failure: Delayed shifting, grinding noises, slipping gears
Schedule: Every 60,000-100,000 miles, inspect at 150,000
Coolant System Flush
Signs of failure: Engine overheating, sweet smell from engine, low coolant levels
Schedule: Every 60,000 miles, crucial by 150,000
Brake System
Brake Fluid Flush
Signs of failure: Spongy brake pedal, increased stopping distance, warning light
Schedule: Every 2-3 years or 30,000 miles, check at 150,000
Brake Hardware Inspection
Signs of failure: Squealing, vibration when braking, reduced brake performance
Schedule: Inspect every 15,000-20,000 miles, replace as needed
Suspension Components
Shock/Strut Replacement
Signs of failure: Bouncy ride, nose diving when braking, uneven tire wear
Schedule: Usually needed between 100,000-150,000 miles
Ball Joint Inspection
Signs of failure: Clunking noise, steering wandering, uneven tire wear
Schedule: Inspect every 50,000 miles, often need replacement by 150,000
Additional Services
Power Steering Fluid Flush
Signs of failure: Whining noise, stiff steering, fluid appears dark
Schedule: Every 75,000-100,000 miles
Fuel System Cleaning
Signs of failure: Rough idle, decreased MPG, hesitation during acceleration
Schedule: Every 60,000-100,000 miles
Note: These intervals are general guidelines. Actual maintenance needs may vary based on vehicle make, model, and driving conditions. Always consult your vehicle's owner's manual for specific maintenance schedules.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
