Trunk Latch Assembly
Estimated Labor:0.5 hours ($62.50)
Parts Cost:$50 – $100
Total Estimate:$112.50 – $162.50
Trunk Hinges
Estimated Labor:0.25 hours ($31.25)
Parts Cost:$20 – $40
Total Estimate:$51.25 – $71.25
Trunk Lock Cylinder
Estimated Labor:0.5 hours ($62.50)
Parts Cost:$30 – $60
Total Estimate:$92.50 – $122.50
Trunk Weatherstrip
Estimated Labor:0.25 hours ($31.25)
Parts Cost:$30 – $50
Total Estimate:$61.25 – $81.25
Trunk Release Cable
Estimated Labor:1.0 hour ($125)
Parts Cost:$40 – $80
Total Estimate:$165 – $205
Trunk Hinges
Inspection:Check hinges for corrosion or dirt buildup. Clean away debris with a solvent.
Lubrication:Apply a high-quality lithium-based grease to each pivot point. Ensure even coverage.
Verification:Open and close the trunk to confirm smooth movement and reapply lubricant as needed.
Trunk Latch Assembly
Inspection:Examine the latch for signs of wear or hardened grease. Remove any residue with a degreasing agent.
Lubrication:Use a silicone or white lithium spray to coat internal moving components. Wipe away excess.
Verification:Test by closing and opening the trunk multiple times, ensuring a firm latch without sticking.
Trunk Seal (Weatherstripping)
Inspection:Look for cracks, tears, or debris on the weatherstripping. Clean any dirt with mild soap and water.
Lubrication:Lightly coat the rubber with a silicone-based protectant to prevent drying or cracking.
Verification:Confirm the trunk closes securely and that the seal is intact with no visible gaps.
Trunk Lock Cylinder (If Applicable)
Inspection:Carefully inspect the key slot for dirt or debris. Use compressed air to clear any buildup.
Lubrication:Apply graphite lock lubricant or a specially formulated lock oil into the cylinder. Avoid over-lubrication.
Verification:Insert and remove the key several times to confirm smooth operation.
Trunk Release Cable or Actuator (If Applicable)
Inspection:Inspect the cable for fraying or kinks, and the actuator for any electrical or mechanical faults.
Lubrication:For a cable, apply a spray lubricant along its length, ensuring it penetrates the housing. For an actuator, use a targeted lubricant on moving joints.
Verification:Engage and disengage the release mechanism to confirm consistent function and proper leverage.
What is a Lubricate Trunk and what does it do
What is a Lubricate Trunk and What Does It Do
ALubricate Trunkis an essential component in various mechanical and industrial systems, designed to store and distribute lubricants efficiently. It plays a crucial role in ensuring the smooth operation and longevity of machinery by providing a consistent supply of lubrication to moving parts.
Functions of a Lubricate Trunk
The primary functions of a Lubricate Trunk include:
- Storage:It acts as a reservoir for lubricants, keeping them readily available for use when needed.
- Distribution:The trunk is equipped with a network of pipes and valves that facilitate the controlled distribution of lubricants to various parts of the machinery.
- Protection:By maintaining a steady supply of lubrication, it helps protect mechanical components from wear and tear, reducing the risk of breakdowns and extending the lifespan of the equipment.
- Efficiency:Proper lubrication minimizes friction and energy loss, enhancing the overall efficiency of the machinery.
In summary, a Lubricate Trunk is a vital part of any system that relies on mechanical movement, ensuring optimal performance and durability through effective lubrication management.
Trunk Latch Mechanism
Common signs of failure:
- Trunk does not latch securely or pops open unexpectedly
- Excessive friction or grinding noises during latching
- Difficulty turning the key or pressing the release
Trunk Hinges
Common signs of failure:
- Stiff or creaking movement when opening or closing
- Visible rust or corrosion on hinge pins
- Misalignment causing uneven trunk gaps
Trunk Seal
Common signs of failure:
- Water leakage into the trunk area
- Cracked or brittle rubber seal
- Persistent musty or damp smell inside trunk
Trunk Lock Cylinder
Common signs of failure:
- Key sticking or difficult to insert or remove
- Lock cylinder turning without engaging the latch
- Visible rust buildup or debris inside the keyhole
Trunk Release Cable
Common signs of failure:
- Cable feels loose or unresponsive when pulling the release
- Trunk fails to open even with a strong pull
- Frayed or visible wear on the cable housing
Trunk Lift Supports (Struts)
Common signs of failure:
- Trunk no longer stays open on its own
- Hissing sound indicating gas leakage
- Oil seepage around the lift support rod
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
