Oil Change Service Costs Explained
Conventional Oil Change
Labor Time: 30-45 minutes
Labor Cost: $62.50-$93.75
Parts (Oil + Filter): $25-$35
Total Estimated Cost: $87.50-$128.75
Synthetic Blend Oil Change
Labor Time: 30-45 minutes
Labor Cost: $62.50-$93.75
Parts (Oil + Filter): $35-$50
Total Estimated Cost: $97.50-$143.75
Full Synthetic Oil Change
Labor Time: 30-45 minutes
Labor Cost: $62.50-$93.75
Parts (Oil + Filter): $45-$70
Total Estimated Cost: $107.50-$163.75
Diesel Oil Change
Labor Time: 45-60 minutes
Labor Cost: $93.75-$125
Parts (Oil + Filter): $80-$120
Total Estimated Cost: $173.75-$245
*Prices may vary based on vehicle make/model and oil capacity. Additional costs may apply for specialty filters or synthetic oils. Please contact us for an exact quote for your specific vehicle.
Standard Oil Change Procedure
A standard oil change involves the following steps:
- Vehicle Inspection and Preparation
- Verify vehicle information and recommended oil type
- Warm up engine to operating temperature
- Lift vehicle on appropriate lift or jack stands
- Oil Drainage
- Place drain pan under oil drain plug
- Remove drain plug carefully
- Allow old oil to drain completely (10-15 minutes)
- Replace drain plug with new washer if required
- Filter Replacement
- Locate and remove old oil filter
- Clean filter mounting surface
- Lubricate new filter gasket with fresh oil
- Install new filter (hand-tight plus 1/4 turn)
- New Oil Addition
- Add manufacturer-specified amount of new oil
- Replace oil cap securely
- Lower vehicle
- Final Checks
- Start engine and check for leaks
- Verify oil pressure
- Check oil level with dipstick
- Reset oil life monitor if applicable
Synthetic Oil Change
The synthetic oil change follows the same basic steps as a standard oil change, but with these key differences:
- Oil Selection:Premium synthetic oil is used instead of conventional oil
- Filter Quality:Usually includes a higher-quality filter designed for synthetic oil
- Duration:Typically lasts longer (7,500-10,000 miles vs 3,000-5,000 for conventional)
High-Mileage Oil Change
This service follows the standard procedure with these additional considerations:
- Special Oil:Uses oil specifically formulated for vehicles over 75,000 miles
- Seal Conditioning:Contains additives to help condition aging seals and prevent leaks
- Additional Inspection:Includes checking for:
- Oil leaks
- Seal condition
- Engine wear indicators
Note: All oil changes include proper disposal of old oil and basic safety inspection of visible components.
Types of Oil Changes Explained
Conventional Oil Change
What it is:A conventional oil change uses standard petroleum-based motor oil that has been refined from crude oil.
What it does:This basic oil change lubricates engine components, helps regulate engine temperature, and provides essential engine protection. It's suitable for drivers with simple engine designs and regular driving habits.
Synthetic Blend Oil Change
What it is:A synthetic blend combines conventional motor oil with synthetic base oils and additives.
What it does:This mid-grade option offers better protection than conventional oil, especially in varying temperatures. It provides improved oxidation resistance and helps protect against engine deposits while being more cost-effective than full synthetic.
Full Synthetic Oil Change
What it is:Full synthetic oil is artificially manufactured using chemically modified petroleum components and high-performance additives.
What it does:This premium option offers superior engine protection, better performance in extreme temperatures, enhanced cleaning power, and longer-lasting protection. It's ideal for high-performance vehicles and engines that operate under heavy loads.
High-Mileage Oil Change
What it is:High-mileage oil is specifically formulated for vehicles with over 75,000 miles, available in both synthetic and conventional bases.
What it does:This specialized oil contains additives that help reduce oil consumption, minimize leaks, and prevent oil burn-off in older engines. It also helps reduce engine wear and extends engine life in older vehicles.
Diesel Oil Change
What it is:Diesel oil is specifically engineered for diesel engines, with unique additives and properties suited for diesel operation.
What it does:This specialized oil handles the higher compression ratios and temperatures of diesel engines while providing superior soot handling capabilities and protection against wear in heavy-duty applications.
Note: Regular oil changes are essential for maintaining your vehicle's performance and longevity. Our certified technicians can help you choose the right type of oil for your specific vehicle and driving conditions.
Warning Signs of Oil Change Neglect: Symptoms That Indicate Your Vehicle Needs Immediate Attention
Understanding Oil Change Needs and Warning Signs
Conventional Oil Change
Typical Service Schedule:
- Every 3,000-5,000 miles or every 6 months (whichever comes first)
- More frequent changes needed for severe driving conditions
- Older vehicles may require more frequent changes
Signs of Needed Service:
- Dark, dirty oil on dipstick
- Engine running louder than usual
- Oil change reminder light illuminated
- Oil level dropping quickly
Synthetic Oil Change
Typical Service Schedule:
- Every 7,500-10,000 miles or annually (whichever comes first)
- Check manufacturer recommendations as some newer vehicles can go longer
- High-performance vehicles may require specific intervals
Signs of Needed Service:
- Oil appears gritty or has particles when checked
- Increased engine noise or knocking
- Decreased fuel efficiency
- Oil warning light activated
Synthetic Blend Oil Change
Typical Service Schedule:
- Every 5,000-7,500 miles or every 6-8 months
- Ideal for moderate climate conditions
- Good for light towing and hauling
Signs of Needed Service:
- Oil appears darker than normal
- Engine running rougher than usual
- Unusual exhaust smoke
- Check engine light illuminated
High-Mileage Oil Change
Typical Service Schedule:
- Every 5,000-7,500 miles or every 6 months
- Recommended for vehicles over 75,000 miles
- May need more frequent changes based on vehicle condition
Signs of Needed Service:
- Oil leaks becoming more frequent
- Increased oil consumption
- Engine running more roughly than normal
- Visible exhaust smoke
Note: These are general guidelines. Always consult your vehicle's owner's manual for specific recommendations and maintain a regular service schedule for optimal vehicle performance.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
