Yaw Rate Sensor
Part Cost Range:$150 – $400
Labor (1 hour @ $125/hour):$125
Total Range:$275 – $525
Mounting Bracket
Part Cost Range:$20 – $50
Labor (0.5 hour @ $125/hour):$62.50
Total Range:$82.50 – $112.50
Wiring Harness (if replacement is needed)
Part Cost Range:$15 – $50
Labor (0.5 hour @ $125/hour):$62.50
Total Range:$77.50 – $112.50
Part 1: Vehicle Preparation
Park the vehicle on a level surface and engage the parking brake. Turn off the ignition and remove the key. Disconnect the negative battery cable to prevent accidental electrical discharge or airbag activation during the procedure.
Part 2: Accessing the Yaw Rate Sensor
Locate the yaw rate sensor, typically found beneath the floor console or under a seat near the center of the vehicle. Remove any trim panels, seat mounting bolts, or center console components that block direct access to the sensor’s mounting points and electrical connectors.
Part 3: Disconnecting the Old Sensor
Carefully release the electrical connector from the sensor by pressing the connector tab or pulling back the retaining clip. Inspect the wiring harness and connector for signs of damage such as corrosion or worn insulation.Do not pull on the wiringdirectly to avoid damaging the harness.
Part 4: Removing the Old Sensor
Use the appropriate socket or wrench to remove the sensor mounting bolts. Keep track of any shims or brackets used for alignment. Gently lift the yaw rate sensor away from its position, making sure not to disturb nearby components or wiring.
Part 5: Installing the New Sensor
Position the new sensor in the exact orientation noted during removal, reinstalling any shims or brackets if necessary. Hand-tighten the mounting bolts to ensure the sensor is properly aligned, then use a torque wrench to tighten them to the manufacturer’s recommended specifications.
Part 6: Connecting the New Sensor
Reattach the wiring harness and electrical connector. Listen for aclickor check that the retaining clip is fully engaged to ensure a secure connection.
Part 7: Reassembly and Final Checks
Reinstall any removed panels, seats, or console components. Reconnect the negative battery cable and start the vehicle. Follow the manufacturer’s recommended steps for yaw rate sensor calibration, if required. Finally, test-drive the vehicle to confirm that the traction control and stability systems function correctly.
What is a Yaw Rate Sensor and what does it do
What is a Yaw Rate Sensor and What Does It Do
AYaw Rate Sensoris a crucial component in modern vehicles, particularly in the realm of vehicle stability control systems. It measures the rate of rotation around the vehicle's vertical axis, which is commonly referred to as the yaw rate.
The primary function of the yaw rate sensor is to help the vehicle's electronic stability control (ESC) system maintain control during dynamic driving conditions. By detecting the vehicle's rotational speed, the sensor provides data that helps the ESC system determine if the vehicle is beginning to skid or lose traction.
When the yaw rate sensor detects a discrepancy between the driver's intended direction and the vehicle's actual movement, it sends this information to the ESC system. The system then automatically applies braking to individual wheels and adjusts engine power to help the driver maintain control and keep the vehicle on its intended path.
In summary, the yaw rate sensor plays a vital role in enhancing vehicle safety by providing real-time data that assists in preventing skids and maintaining stability during challenging driving conditions.
Yaw Rate Sensor
Common signs of failure or signs that repair is needed:
- Traction control or stability control warning lights appear on the dashboard.
- Unusual or abrupt activation of the anti-lock braking system (ABS) when turning or braking.
- Vehicle feels unstable during cornering or when changing lanes.
- Irregular or inconsistent data readings on diagnostic scans.
Steering Angle Sensor
Common signs of failure or signs that repair is needed:
- Steering wheel icon or stability control light appears on the dashboard.
- Loss of power steering assistance or inconsistent steering feel.
- Difficulty maintaining a straight line or improper steering correction by the vehicle's stability system.
- Diagnostic trouble codes (DTCs) indicating steering angle sensor faults.
Wiring Harness and Connectors
Common signs of failure or signs that repair is needed:
- Intermittent or no signal from the yaw rate sensor due to loose or corroded connectors.
- Warning lights on the dashboard that come and go without a clear pattern.
- Visible damage or fraying on wiring insulation.
- Diagnostic tests pointing to open or short circuits in sensor wiring.
Electronic Stability Control (ESC) or ABS Module
Common signs of failure or signs that repair is needed:
- Persistent or multiple system warning lights related to stability or traction control.
- Vehicle not responding to ESC corrections, leading to reduced stability on slippery or wet roads.
- Frequent error codes indicating communication issues with sensors.
- Unusual clicking or buzzing sounds from the module area when the stability system is active.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
