Air Spring Bag
Estimated Labor:2 hours ($250)
Part Cost:$300
Total Estimated Cost:$550
Air Spring Compressor
Estimated Labor:2.5 hours ($312.50)
Part Cost:$500
Total Estimated Cost:$812.50
Air Spring Solenoid
Estimated Labor:1 hour ($125)
Part Cost:$80
Total Estimated Cost:$205
Air Lines/Hoses
Estimated Labor:1 hour ($125)
Part Cost:$50
Total Estimated Cost:$175
Air Spring Bladder
Inspect the air spring bladder for any cracks or leaks. If damage is found, replace with a new unit. Ensure proper seating and no twisting during reinstallation.
Typical repair steps:- Deflate the air spring system.
- Remove fasteners securing the bladder.
- Disconnect air lines carefully to avoid damage.
- Install new bladder, align mounting points, and reattach lines.
- Reinflate and check for air leaks or misalignment.
Mounting Brackets
Check for corrosion or damaged welds on the mounting brackets. Tighten or replace any loose or worn components to maintain proper alignment.
Typical repair steps:- Remove any rust or debris from bracket surfaces.
- Secure new or cleaned brackets with recommended torque specifications.
- Check rubber isolators or grommets for wear and replace if necessary.
Air Lines and Fittings
Inspect all air lines for cracks or pinhole leaks. Replace damaged lines and confirm connections are snug but not overtightened.
Typical repair steps:- Disconnect old or leaking lines from fittings.
- Cut replacement lines to the correct length, ensuring clean edges.
- Attach lines to fittings with new O-rings if required.
- Check for leaks by applying soapy water around connections.
Air Spring Solenoid Valve
Test the solenoid for proper operation and replace if it fails electrical or mechanical checks. Ensure no debris is blocking airflow.
Typical repair steps:- Unplug electrical connector and remove retaining hardware.
- Clean the valve seat and inspect for blockages.
- Install replacement solenoid and reconnect wiring.
- Perform system calibration or relearn procedure if advised by the manufacturer.
Bump Stop or Damper
Check the internal bump stop or damper for cracks or fatigue. Replace if it shows signs of wear that could compromise ride comfort or safety.
Typical repair steps:- Remove air spring assembly to access the internal bump stop.
- Inspect for rubber deterioration or physical damage.
- Install a new bump stop with proper orientation.
- Reinstall air spring and confirm full range of motion.
Protective Boot or Sleeve
Ensure the protective boot is free of tears or punctures to shield the air spring from dirt and debris. Replace if compromised.
Typical repair steps:- Carefully remove the existing boot.
- Clean the surrounding area to prevent contaminants from entering.
- Slide the new boot into place, making sure it is positioned correctly.
- Secure any retaining clips or clamps and check for proper coverage.
What is an Air Spring and what does it do
What is an Air Spring and What Does It Do
Anair springis a type of suspension component used in vehicles and machinery to provide a smooth and controlled ride. Unlike traditional coil or leaf springs, air springs use compressed air to absorb shock and vibration, offering a more adaptable and comfortable experience.
How Does an Air Spring Work
Air springs consist of a flexible rubber and fabric bladder that contains air under pressure. When the vehicle encounters a bump or uneven surface, the air inside the bladder compresses, absorbing the impact and reducing the amount of shock transferred to the vehicle's chassis. This results in a smoother ride and improved handling.
Benefits of Air Springs
- Adjustable Ride Height:Air springs allow for easy adjustment of the vehicle's ride height, which can be beneficial for different driving conditions or when carrying varying loads.
- Improved Comfort:By providing a smoother ride, air springs enhance passenger comfort, especially on rough or uneven terrain.
- Enhanced Vehicle Stability:Air springs help maintain consistent vehicle stability and handling by evenly distributing weight and reducing body roll.
- Durability:Made from high-quality materials, air springs are designed to withstand harsh conditions and provide long-lasting performance.
Overall, air springs are a versatile and effective solution for improving vehicle suspension, offering numerous benefits in terms of comfort, performance, and adaptability.
Air Spring Bellows
Cracks or Tears: Visible damage to the rubber surface, such as cracks, splits, or tears.
Leaking Air: Hissing sounds or a drop in ride height shortly after inflation.
Uneven Ride Height: One corner of the vehicle sitting lower than the others.
Frequent Compressor Activation: The compressor cycling more often to compensate for air loss.
Air Lines and Fittings
Air Pressure Loss: Rapid decrease in system pressure or hissing noise at connections.
Cracked or Brittle Lines: Stiff or cracking air lines indicating age or damage.
Loose Connections: Fittings that are visibly wet with soapy water or show bubbles when sprayed.
Corrosion on Fittings: Rust or buildup that compromises the seal.
Mounting Hardware
Loose Bolts or Brackets: Noticeable rattling or movement around the air spring mount.
Visible Rust or Wear: Signs of corrosion on metal parts that might weaken the mounting.
Cracked Bushings or Insulators: Rubber parts that are torn or missing.
Shock Absorbers (if integrated)
Excessive Bouncing: When driving over bumps, the vehicle continues to bounce more than normal.
Oil Leaks: Residue or dripping fluid around the shock body.
Clunking or Knocking Sounds: Unusual noises when driving on uneven roads.
Air Compressor
Loud or Unusual Noises: Grinding or whining noises during operation.
Slow Inflation: Taking significantly longer to raise the vehicle’s ride height.
Compressor Overheating: Rapid cycling or shutting down due to excessive temperature.
Frequent System Errors: Dashboard warnings or error codes related to air supply.
Air Dryer or Filter
Moisture in the Lines: Signs of water accumulation, increasing the risk of corrosion or freeze-ups.
Blocked or Clogged Filter: Reduced air flow creating slow or uneven suspension inflation.
Unpleasant Odors: Musty smell indicating trapped moisture or contamination.
Valve System (Solenoid Valves or Valve Block)
Erratic Ride Height: Sudden or inconsistent changes in height levels on one corner.
Sticking or Slow Valves: Delayed response when adjusting ride height or venting air.
Leaking at Valve Seals: Whistling or a constant hiss near the valve body.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
