Tire Pressure Monitor System (TPMS) Diagnostic Cost Guide
Basic TPMS Light Reset
If your TPMS light is on after properly inflating tires, a simple system reset may be needed.
Estimated Time: 15-30 minutes
Labor Cost: $31.25 - $62.50
TPMS Sensor Battery Replacement
When sensor batteries die (typically 5-7 years), sensors need replacement.
Estimated Time: 30-45 minutes per sensor
Labor Cost: $62.50 - $93.75 per sensor
Parts Cost: $30-$75 per sensor
Total Cost: $92.50 - $168.75 per sensor
TPMS Sensor Damage Diagnosis
Diagnosing damaged or malfunctioning sensors requires specialized testing.
Estimated Time: 45-60 minutes
Labor Cost: $93.75 - $125
Additional costs may apply if sensor replacement is needed
TPMS Control Module Diagnosis
When system-wide issues occur, control module testing is required.
Estimated Time: 1-1.5 hours
Labor Cost: $125 - $187.50
Module replacement if needed: $150-$300 plus labor
Full System Relearn/Reprogramming
Required after multiple sensor replacements or module work.
Estimated Time: 45-60 minutes
Labor Cost: $93.75 - $125
Note: Prices are estimates and may vary based on vehicle make/model and specific diagnostic requirements. Additional parts costs may apply. Please contact us for an accurate quote for your specific vehicle.
Tire Pressure Monitor System (TPMS) Lamp Diagnosis & Repair Procedures
1. Solid TPMS Warning Light
Indicates:One or more tires are significantly under-inflated
Repair Steps:
- Check all tire pressures with a quality gauge
- Inflate tires to the recommended pressure (found on driver's door jamb)
- Drive vehicle above 20 mph for several minutes to reset system
- If light remains on, check for slow leaks or damaged tires
2. Blinking TPMS Light
Indicates:System malfunction or sensor battery issues
Repair Steps:
- Perform system diagnostic scan using TPMS tool
- Check each sensor's battery life and signal strength
- Replace faulty sensors if identified
- Perform TPMS relearn procedure specific to vehicle make/model
- Verify system operation with test drive
3. TPMS Light After Tire Rotation
Indicates:Sensors need position relearn
Repair Steps:
- Access vehicle's TPMS relearn mode (varies by manufacturer)
- Use TPMS tool to activate each sensor in correct sequence
- Wait for system confirmation
- Test drive to verify proper operation
4. Intermittent TPMS Light
Indicates:Temperature-related pressure changes or developing sensor issues
Repair Steps:
- Check tire pressures when tires are cold
- Document pressure changes over several days
- Perform system diagnostic scan
- Replace weak sensors if identified
- Monitor system operation over several days
5. TPMS Light After New Tire Installation
Indicates:Possible sensor damage or need for relearn
Repair Steps:
- Inspect sensors for physical damage
- Verify proper sensor installation
- Replace sensor grommets and valve cores if needed
- Perform system relearn procedure
- Verify proper pressure and system operation
Important Note:These procedures may vary by vehicle manufacturer. Always consult your vehicle's service manual for specific instructions. Professional diagnosis is recommended for persistent TPMS issues.
Understanding Tire Pressure Monitor Lamp Diagnosis
What is Tire Pressure Monitor Lamp Diagnosis
Tire Pressure Monitor Lamp Diagnosis is a diagnostic service that investigates why your vehicle's Tire Pressure Monitoring System (TPMS) warning light is illuminated on your dashboard.
What Does the Service Include
- Complete system scan of the TPMS
- Inspection of all tire pressure sensors
- Verification of individual tire pressures
- Testing of sensor batteries and functionality
- Checking for sensor damage or malfunction
- Assessment of the TPMS control module
Why is This Service Important
- Ensures your vehicle's tire pressure monitoring system is working correctly
- Helps prevent tire wear and potential blowouts
- Improves fuel efficiency by maintaining proper tire pressure
- Identifies faulty sensors before they completely fail
- Maintains compliance with safety regulations
When Should You Get This Service
- When your TPMS warning light stays on after inflating tires
- After tire rotation or replacement
- If you notice irregular tire pressure readings
- When purchasing a used vehicle
- After experiencing impact damage to wheels
Note: Regular TPMS diagnosis helps maintain your vehicle's safety systems and can prevent more expensive repairs in the future.
Common Failure Symptoms and Warning Signs: Understanding Tire Pressure Monitor System Malfunctions
Tire Pressure Monitor (TPMS) Lamp Diagnosis Guide
Solid TPMS Warning Light
Signs of Failure:
- Continuous yellow or orange illuminated symbol on dashboard
- Indicates one or more tires are significantly under-inflated (typically 25% below recommended pressure)
- May be accompanied by a chime or warning message
Service Schedule: Check tire pressure immediately and inflate to recommended PSI. Light should turn off within several minutes of proper inflation.
Flashing TPMS Warning Light
Signs of Failure:
- Light blinks for 60-90 seconds before staying solid
- Indicates system malfunction or sensor failure
- May occur after tire rotation or sensor battery death
Service Schedule: Professional diagnosis recommended every 5-7 years or when flashing occurs. TPMS sensor batteries typically last 5-10 years.
TPMS Sensor Maintenance
Regular Service Schedule:
- Sensor battery check: Every 5 years
- Sensor testing: During tire rotation (every 5,000-8,000 miles)
- Sensor replacement: When battery dies (typically 5-10 years)
- System recalibration: After tire rotation or sensor replacement
Preventative Maintenance
Recommended Schedule:
- Monthly tire pressure checks
- TPMS system test during annual vehicle inspection
- Sensor inspection during tire replacement
- Professional diagnostic scan if warning light appears
Note: Specific service intervals may vary by vehicle make and model. Consult your owner's manual for manufacturer-specific recommendations.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
