Transmission Repair & Service

Automatic & Manual Transmission Specialists

Don't let transmission problems leave you stranded. Ourcertified transmission specialistsare here to keep you moving with confidence.

Industry-Leading Protection:

24-Month / 24,000-Mile Warranty on All Repairs

ASE-Certified Mechanics

All Makes & Models Serviced

Transmission Service Cost Guide

Basic Transmission Service
Includes fluid change, pan gasket, filter replacement, and basic inspection
Labor: 2-3 hours
Estimated Cost: $250-375 plus parts ($50-100)
Total Range: $300-475

Transmission Rebuild
Complete disassembly, replacement of worn parts, and reassembly
Labor: 20-30 hours
Estimated Cost: $2,500-3,750 plus parts ($500-1,500)
Total Range: $3,000-5,250

Transmission Replacement
Removal of old transmission and installation of new/remanufactured unit
Labor: 8-12 hours
Estimated Cost: $1,000-1,500 plus transmission ($1,500-3,500)
Total Range: $2,500-5,000

Transmission Solenoid Replacement
Diagnosis and replacement of faulty solenoids
Labor: 4-6 hours
Estimated Cost: $500-750 plus parts ($100-300)
Total Range: $600-1,050

Clutch Replacement
Removal and replacement of clutch assembly in manual transmissions
Labor: 5-8 hours
Estimated Cost: $625-1,000 plus parts ($300-600)
Total Range: $925-1,600

Note: These are estimated costs based on our shop rate of $125/hour. Actual costs may vary depending on vehicle make/model and the extent of repairs needed. All estimates include diagnostic time.

Additional Costs May Include:

  • Specialty tools or equipment rental
  • Emergency or rush service
  • Additional parts as needed
  • Extended warranty options

Automatic Transmission Service

Basic Service Steps:

  1. Perform initial diagnostic scan and road test to verify transmission issues
  2. Raise vehicle on lift and drain old transmission fluid
  3. Remove transmission pan and inspect for metal debris or damage
  4. Replace transmission filter and clean pan
  5. Install new pan gasket and reinstall pan
  6. Refill with manufacturer-specified transmission fluid
  7. Clear transmission codes and perform adaptive learning procedures
  8. Road test to ensure proper operation

Major Repair/Rebuild Steps:

  1. Remove transmission from vehicle
  2. Disassemble transmission completely
  3. Inspect all internal components for wear and damage
  4. Replace worn clutch plates, bands, and solenoids
  5. Replace seals, gaskets, and bearings
  6. Clean and inspect valve body
  7. Reassemble transmission with new parts
  8. Install rebuilt transmission
  9. Perform computer adaptation and testing
  10. Extended road test to verify repair

Manual Transmission Service

Basic Service Steps:

  1. Raise vehicle and drain old transmission fluid
  2. Inspect for leaks around seals and gaskets
  3. Refill with appropriate gear oil
  4. Check clutch pedal free play
  5. Test shift linkage operation
  6. Road test to verify smooth operation

Major Repair/Rebuild Steps:

  1. Remove transmission from vehicle
  2. Disassemble transmission case
  3. Inspect gears, synchronizers, and bearings
  4. Replace worn components
  5. Install new seals and gaskets
  6. Replace clutch assembly if needed
  7. Reassemble transmission
  8. Reinstall and align transmission
  9. Fill with new fluid
  10. Test shift operation and road test

CVT (Continuously Variable Transmission) Service

Basic Service Steps:

  1. Perform computer diagnostic scan
  2. Drain old CVT fluid
  3. Clean transmission pan if equipped
  4. Replace CVT fluid filter if serviceable
  5. Refill with specific CVT fluid
  6. Reset transmission adaptive values
  7. Road test to verify operation

Major Repair Steps:

  1. Remove transmission from vehicle
  2. Disassemble CVT unit
  3. Inspect belt/chain and pulleys
  4. Replace worn components
  5. Service valve body and solenoids
  6. Replace seals and gaskets
  7. Reassemble transmission
  8. Reinstall and fill with CVT fluid
  9. Perform computer initialization
  10. Extended road testing

Note: All transmission services should be performed by certified technicians using manufacturer-specified parts and fluids. Service procedures may vary by make and model.

Types of Transmission Services

transmission-service.webp

Automatic Transmission Service

AnAutomatic Transmission Serviceis a comprehensive maintenance procedure designed to extend the life of your vehicle's automatic transmission system. This service includes:

  • Draining old transmission fluid
  • Replacing the transmission filter
  • Installing new, clean transmission fluid
  • Cleaning the transmission pan
  • Inspecting for wear and potential issues

Regular automatic transmission service helps prevent costly repairs and ensures smooth gear shifting.

Manual Transmission Service

AManual Transmission Servicefocuses on maintaining your vehicle's manual gearbox system. This service typically includes:

  • Draining old manual transmission fluid
  • Inspecting the clutch system
  • Checking gear synchronizers
  • Adding new manual transmission fluid
  • Adjusting clutch pedal free play

This service ensures proper gear engagement and extends clutch life.

CVT Transmission Service

AContinuously Variable Transmission (CVT) Serviceis specialized maintenance for vehicles equipped with this modern transmission type. The service includes:

  • Removing old CVT fluid
  • Inspecting the belt or chain drive
  • Installing specific CVT fluid
  • Checking electronic controls
  • Testing transmission operation

CVT service helps maintain smooth, stepless acceleration and optimal fuel efficiency.

Transmission Flush Service

ATransmission Flush Serviceis a deep cleaning procedure that removes all old fluid and contaminants from your transmission system. This service involves:

  • Complete removal of old transmission fluid
  • Cleaning the transmission cooler lines
  • Flushing out debris and contaminants
  • Installing new transmission fluid
  • Adding cleaning additives if necessary

This service provides a more thorough cleaning than a standard fluid change and helps prevent transmission problems.

Transmission Diagnostic Service

ATransmission Diagnostic Serviceis a comprehensive examination to identify transmission problems. This service includes:

  • Computer diagnostic scanning
  • Road testing
  • Visual inspection
  • Fluid level and condition check
  • Shift pattern analysis

This service helps identify issues before they become major problems, saving you money in the long run.

Transmission Failure Warning Signs: Symptoms That Shouldn't Be Ignored

Automatic Transmission Service

Signs of Failure:

  • Delayed or rough shifting
  • Grinding or whining noises
  • Slipping between gears
  • Burning smell
  • Check Engine light illumination
  • Transmission fluid leaks
  • Vehicle refusing to go into gear

Typical Service Schedule:

  • Transmission fluid change: Every 30,000-60,000 miles
  • Transmission filter replacement: Every 30,000-60,000 miles
  • Transmission inspection: During regular maintenance intervals

Manual Transmission Service

Signs of Failure:

  • Difficulty shifting gears
  • Clutch pedal feels spongy or sticks
  • Grinding when shifting
  • Clutch slipping
  • Strange noises when in neutral
  • Leaking transmission fluid

Typical Service Schedule:

  • Manual transmission fluid change: Every 30,000-60,000 miles
  • Clutch replacement: Every 60,000-100,000 miles (varies by driving habits)
  • Clutch cable adjustment: As needed

CVT (Continuously Variable Transmission) Service

Signs of Failure:

  • Shaking or vibrating during acceleration
  • High-pitched whining noise
  • Delayed acceleration response
  • Overheating transmission
  • Burning smell
  • Jerking during speed changes

Typical Service Schedule:

  • CVT fluid change: Every 30,000-50,000 miles
  • Belt inspection: Every 60,000 miles
  • Regular computer diagnostic checks recommended

Important Note: These are general guidelines. Always consult your vehicle's owner's manual for specific maintenance schedules, as requirements can vary by make, model, and driving conditions.

How It Works

  • Get a quote online or set-up a time to have your vehicle looked at.
  • Pick time slots that work for you, easily, online.
  • We will confirm appointments and send reminders.
  • Our mechanics bring everything that is needed to you.
  • All you have to do is provided a safe area for the work to be performed.

What we need from you

  • A safe place to work on your vehicle
  • No working on the side of busy roads
  • No working on unstable or steep surfaces.
  • We do not perform repairs during severe weather.
  • Authorization from a property owner or management.
  • Repair work done in a parking lot or at your  requires permission.
  • We do not do repairs in areas restricted by law.

Common Questions

Service Area

Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville,  Kentwood, Walker, and Wyoming

Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.

Contact us if you have any questions about where we provide services.

What our customers say: