Trunk Striker Plate Repair Cost Guide
Basic Striker Plate Adjustment
Labor Time: 0.5 hours
Typical Cost: $62.50
Includes realignment and tightening of existing striker plate to restore proper trunk closure.
Striker Plate Replacement (Single)
Labor Time: 1-1.5 hours
Parts Cost: $30-50
Typical Total Cost: $155-237.50
Includes removal of damaged striker plate, installation of new part, and alignment.
Dual Striker Plate Replacement
Labor Time: 1.5-2 hours
Parts Cost: $60-100
Typical Total Cost: $247.50-350
Includes replacement of both striker plates and complete alignment service.
Striker Plate with Frame Repair
Labor Time: 2-3 hours
Parts Cost: $50-150
Typical Total Cost: $300-525
Includes repair of surrounding frame damage, striker plate replacement, and full alignment.
Note: Prices may vary based on vehicle make/model and extent of damage. Additional costs may apply if there is significant frame or body damage around the striker plate area.
Trunk Striker Plate Repair Procedures
BMW E46 Trunk Striker Plate
Common Issue:Mounting points crack and break away from trunk floor panel
Repair Steps:
- Remove trunk liner and access panels to expose damaged area
- Remove broken striker plate and clean surrounding area
- Cut out damaged/rusted metal section
- Fabricate and weld in new reinforcement panel
- Install new striker plate with proper alignment
- Apply rust preventative coating
- Reinstall trunk liner and test functionality
BMW E90/E92 Trunk Striker Plate
Common Issue:Metal fatigue causing striker plate to separate from trunk floor
Repair Steps:
- Remove trunk carpeting and access panels
- Remove compromised striker plate
- Clean and prep mounting surface
- Install reinforcement plate behind mounting location
- Weld new striker plate assembly
- Align striker plate for proper trunk closure
- Apply corrosion protection
- Reassemble trunk interior panels
BMW F30 Trunk Striker Plate
Common Issue:Mounting points weaken and fail over time
Repair Steps:
- Remove trunk liner components
- Extract damaged striker plate
- Prepare surface and remove any rust
- Install reinforcement backing plate
- Weld new striker plate assembly
- Adjust alignment for proper trunk operation
- Apply protective coating
- Reinstall trunk interior components
Note:All repairs should be performed by qualified technicians with proper welding equipment and experience working with automotive sheet metal. Proper alignment is crucial for correct trunk operation and weatherproofing.
Repair times typically range from 2-4 hours depending on the extent of damage and rust remediation required.
Understanding Trunk Striker Plates
ATrunk Striker Plateis a critical component in your vehicle's trunk locking mechanism. It's the metal plate mounted on the vehicle's body (typically on the trunk opening) that works in conjunction with the trunk latch to secure your trunk when closed.
What Does a Trunk Striker Plate Do
The trunk striker plate serves several important functions:
- Secure Closure:It provides a solid catching point for the trunk latch to grab onto, ensuring your trunk stays firmly closed while driving.
- Alignment:Helps properly align the trunk lid when closing, preventing misalignment issues that could lead to poor sealing or damage.
- Weather Protection:Works with the trunk's weather stripping to maintain a proper seal, keeping water and debris out of your trunk.
When your trunk striker plate is properly installed and maintained, it ensures:
- Smooth trunk operation
- Proper trunk alignment
- Secure trunk closure
- Protection against theft
- Prevention of water leaks
Note: A damaged or misaligned trunk striker plate can lead to trunk closure issues, security concerns, and potential water leaks. If you notice any problems with your trunk's operation, the striker plate should be one of the first components checked.
Common Failure Symptoms of Trunk Striker Plates
Trunk Striker Plate Maintenance Guide
Signs of Trunk Striker Plate Failure:
- Difficulty closing or latching the trunk
- Rattling or loose trunk movement while driving
- Visible rust or corrosion around the striker plate
- Bent or misaligned striker plate
- Unusual noises when closing the trunk
- Trunk popping open unexpectedly
Typical Service Schedule:
- Visual inspection every 6 months
- Lubrication of moving parts annually
- Tightening of mounting bolts during regular maintenance (every 30,000 miles)
- Complete replacement typically not required unless damage occurs
- Clean and remove debris from striker plate area during regular car washing
Preventive Maintenance Tips:
- Keep the striker plate area clean and free from debris
- Apply silicone-based lubricant to prevent rust
- Avoid slamming the trunk
- Address any alignment issues promptly
Note: Service intervals may vary based on vehicle make, model, and usage conditions. Consult your vehicle's manual for specific recommendations.
How It Works
- Get a quote online or set-up a time to have your vehicle looked at.
- Pick time slots that work for you, easily, online.
- We will confirm appointments and send reminders.
- Our mechanics bring everything that is needed to you.
- All you have to do is provided a safe area for the work to be performed.
What we need from you
- A safe place to work on your vehicle
- No working on the side of busy roads
- No working on unstable or steep surfaces.
- We do not perform repairs during severe weather.
- Authorization from a property owner or management.
- Repair work done in a parking lot or at your requires permission.
- We do not do repairs in areas restricted by law.
Common Questions
Service Area
Our primary service area is greater Grand Rapids and includes Comstock Park, East Grand Rapids, Grandville, Kentwood, Walker, and Wyoming
Our secondary service area is provided by our Belding location and includes: Belding, Greenville, Ionia and the sorrounding areas.
Contact us if you have any questions about where we provide services.
