u1153 instrument cluster communication loss

What it means:

OBD2 Code: U1153
Description: Instrument Cluster Communication Loss
Definition: This code indicates a loss of communication between the instrument cluster and other control modules in the vehicle. The instrument cluster is unable to receive or send data, which may affect the display of information such as speed, fuel level, and warning lights.

Common Causes:

Instrument Cluster Communication Loss

Common Causes:

• Faulty instrument cluster
• Damaged or corroded wiring/connectors
• Defective CAN bus network
• Malfunctioning control module
• Poor ground connections
• Software issues in the vehicle’s ECU

Common Misdiagnosis:

Instrument Cluster Communication Loss – Common Misdiagnosis: Faulty instrument cluster or wiring issues are often misdiagnosed as a defective communication module.

Common Diagnostic Steps:

OBD2 Code: U1153 – Instrument Cluster Communication Loss

Description: This code indicates a loss of communication with the instrument cluster.

Common Diagnostic Steps:

• Check for any other stored codes that might indicate related issues.
• Inspect the wiring and connectors between the instrument cluster and the vehicle’s main control module for damage or disconnection.
• Verify that all fuses related to the instrument cluster are intact and functioning properly.
• Test the battery voltage to ensure it is within normal operating range, as low voltage can affect communication lines.
• Use a scan tool to attempt re-establishing communication with the instrument cluster. If successful, monitor data flow for irregularities.
• If equipped, check for software updates or recalls related to the vehicle’s electronic systems that may address this issue.
• If no faults are found in wiring or connections, consider testing or replacing the instrument cluster itself if it is suspected to be faulty.