U1238 – SCP (J1850) Invalid or Missing Data for Experimental #4

The ODBII code U1238 SCP (J1850) Invalid or Missing Data for Experimental #4 indicates that the vehicle’s communication network has detected invalid or missing data from a specific experimental module or sensor, which may affect system performance or diagnostics.

The severity of ODBII code U1238 is moderate.

Common Causes For: U1237 SCP (J1850) Invalid or Missing Data for Memory Storage

• Faulty wiring or connectors
• Malfunctioning sensors
• Poor ground connections
• Communication issues between modules
• Software glitches or bugs
• Corrupted data signals
• Incompatible aftermarket components
• Low battery voltage or power supply issues

Common misdiagnosis for U1238 SCP (J1850) Invalid or Missing Data for Experimental #4

• Faulty OBDII connector
• Bad ground connections
• Malfunctioning PCM (Powertrain Control Module)
• Corrupted data from other modules
• Wiring issues or shorts in the communication lines
• Faulty sensors or actuators
• Software glitches or outdated firmware
• Battery or power supply issues

Common Troubleshooting Steps

When dealing with OBD-II code U1238, which indicates “SCP (J1850) Invalid or Missing Data for Experimental #4,” you can follow these common troubleshooting steps to diagnose and potentially resolve the issue:

• Check for Additional Codes: Start by scanning the vehicle’s OBD-II system for any other trouble codes. Sometimes, multiple codes can provide more context for the issue.
• Inspect Wiring and Connectors: Examine the wiring and connectors associated with the SCP (Serial Communication Protocol) bus. Look for signs of damage, corrosion, or loose connections that could affect communication.
• Verify Battery Voltage: Ensure that the vehicle’s battery is fully charged and that the voltage is within the normal range (typically 12.4 to 12.6 volts). Low voltage can cause communication issues.
• Check Ground Connections: Inspect the ground connections for the modules involved in the SCP communication. Poor ground connections can lead to communication failures.
• Test the SCP Bus: Use a scan tool to monitor the SCP bus for activity. Check if other modules are communicating properly. If other modules are also showing communication issues, the problem may be with the bus itself.
• Inspect Modules: Identify the specific module that is generating the U1238 code. Check for any signs of damage or malfunction. If possible, test the module in another vehicle to confirm its functionality.
• Look for Software Updates: Check if there are any software updates available for the vehicle’s modules. Sometimes, manufacturers release updates to address communication issues.
• Perform a Hard Reset: Disconnect the vehicle’s battery for a few minutes to reset the modules. Reconnect the battery and see if the code reappears.
• Check for Interference: Ensure that there are no aftermarket devices or modifications that could interfere with the SCP communication, such as alarms, remote starters, or other electronic devices.
• Consult Technical Service Bulletins (TSBs): Look for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued bulletins addressing known issues with the SCP communication. 1
• Professional Diagnosis: If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership. They may have specialized diagnostic tools and experience with the specific vehicle. By following these steps, you can systematically diagnose and address the U1238 code and its underlying causes.