FixItFor.Us
B code body High severity

B1929 Air Bag Safing Sensor Output Circuit Open

The OBD2 code B1929 indicates that there is an open circuit in the airbag safing sensor output, which may prevent the airbag system from functioning properly

Definition

The OBD2 code B1929 indicates that there is an open circuit in the airbag safing sensor output, which may prevent the airbag system from functioning properly

Common causes

  • Faulty airbag safing sensor
  • Open circuit in the wiring harness
  • Poor electrical connections or corroded terminals
  • Damaged or frayed wiring
  • Faulty airbag control module
  • Malfunctioning connectors or plugs
  • Issues with the vehicle's body control module (BCM)

Common misdiagnoses

  • Faulty airbag module
  • Defective airbag sensor
  • Wiring issues or shorts in the airbag system
  • Malfunctioning seat belt pretensioner
  • Incorrectly installed or damaged airbag connectors
  • Faulty crash sensor
  • Issues with the vehicle's body control module (BCM)

Troubleshooting steps

  1. 1. Scan Tool Verification

  2. 2. Use an OBD-II scanner to confirm the presence of the B1929 code. Check for any other related codes that may provide additional context

  3. 3. Visual Inspection

  4. 4. Inspect the wiring and connectors associated with the airbag system, particularly the safing sensor. Look for signs of damage, corrosion, or loose connections

  5. 5. Check the airbag module and any related components for physical damage

  6. 6. Check the Safing Sensor

  7. 7. The safing sensor is designed to detect a collision and send a signal to the airbag control module. Ensure that the sensor is properly connected and functioning

  8. 8. If possible, test the sensor according to the manufacturer's specifications. This may involve checking resistance or voltage levels

  9. 9. Inspect the Airbag Control Module

  10. 10. Ensure that the airbag control module is functioning correctly. Check for any signs of damage or corrosion on the module and its connectors

  11. 11. If the module is suspected to be faulty, it may need to be tested or replaced

  12. 12. Wiring Continuity and Resistance Testing

  13. 13. Use a multimeter to check for continuity in the wiring between the safing sensor and the airbag control module. Look for any breaks or shorts in the wiring

  14. 14. Measure the resistance of the circuit to ensure it is within the manufacturer's specifications

  15. 15. Check for Ground Issues

  16. 16. Ensure that the ground connections for the airbag system are secure and free of corrosion. A poor ground can cause various issues, including open circuits

  17. 17. Clear Codes and Test Drive

  18. 18. After performing repairs or adjustments, clear the trouble codes using the OBD-II scanner

  19. 19. Test drive the vehicle to see if the code reappears. If it does, further investigation may be necessary

  20. 20. Consult Technical Service Bulletins (TSBs)

  21. 21. Check for any TSBs related to the B1929 code for your specific vehicle make and model. Manufacturers may have issued guidance on common issues and fixes

  22. 22. Professional Diagnosis

  23. 23. If the issue persists after following the above steps, consider seeking help from a professional technician or an automotive electrician who specializes in airbag systems. Always remember to take proper safety precautions when working with airbag systems, as they can be dangerous if mishandled. Disconnect the vehicle's battery and wait for a period (usually around 10-15 minutes) before working on the airbag system to ensure that the capacitors are discharged