WOMS
C code chassis High severity

C1243 ABS Outlet Valve Coil LR Circuit Open

The OBD2 code C1243 indicates that there is an open circuit in the left rear (LR) outlet valve coil of the ABS (Anti-lock Braking System), which can affect the operation of the ABS system

Definition

The OBD2 code C1243 indicates that there is an open circuit in the left rear (LR) outlet valve coil of the ABS (Anti-lock Braking System), which can affect the operation of the ABS system

Common causes

  • Open circuit in the ABS outlet valve coil wiring
  • Damaged or corroded connectors
  • Faulty ABS outlet valve coil
  • Short circuit in the wiring harness
  • Poor ground connection
  • Faulty ABS control module

Common misdiagnoses

  • Faulty ABS module
  • Damaged wiring or connectors
  • Faulty wheel speed sensor
  • Brake fluid level issues
  • Incorrectly installed or defective ABS pump
  • Faulty relay or fuse related to the ABS system
  • Issues with the brake pedal position sensor

Troubleshooting steps

  1. 1. Visual Inspection

    Wiring and Connectors: Check the wiring harness and connectors associated with the left rear ABS outlet valve coil. Look for any signs of damage, such as frayed wires, corrosion, or loose connections

  2. 2. ABS Module

    Inspect the ABS control module for any visible damage or loose connections

  3. 3. Check for Additional Codes

    Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are other issues affecting the ABS system

  4. 4. Test the ABS Outlet Valve Coil

    Resistance Test: Use a multimeter to measure the resistance of the left rear ABS outlet valve coil. Compare the reading to the manufacturer's specifications. If the resistance is outside the specified range, the coil may be faulty

  5. 5. Power and Ground

    Check for proper power and ground at the ABS outlet valve coil connector. Use a multimeter to ensure that the coil is receiving the correct voltage when the ignition is on

  6. 6. Inspect the ABS Module

    If the wiring and coil are in good condition, the issue may lie within the ABS control module itself. Check for any internal faults or failures in the module

  7. 7. Check for Short Circuits

    Inspect the wiring for any short circuits that may cause the circuit to open. This can include checking for pinched wires or damaged insulation

  8. 8. Perform a System Reset

    After addressing any identified issues, clear the trouble codes using an OBD-II scanner and take the vehicle for a test drive to see if the code returns

  9. 9. Consult Technical Service Bulletins (TSBs)

    Check for any TSBs related to the ABS system for your specific vehicle make and model. Manufacturers may have issued guidance on common issues and fixes

  10. 10. Professional Diagnosis

    If the problem persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who specializes in ABS systems for further diagnosis.Safety Note Always ensure that you take proper safety precautions when working on a vehicle's braking system. If you are not comfortable performing these steps, it is advisable to seek professional assistance