WOMS
P code powertrain High severity

P20CC Exhaust Aftertreatment Fuel Injector "A" Control Performance

The OBD2 code P20CC indicates a performance issue with the exhaust aftertreatment fuel injector "A," which is responsible for injecting fuel into the exhaust system to assist in reducing emissions

Definition

The OBD2 code P20CC indicates a performance issue with the exhaust aftertreatment fuel injector "A," which is responsible for injecting fuel into the exhaust system to assist in reducing emissions

Common causes

  • Faulty exhaust aftertreatment fuel injector
  • Wiring issues or damaged connectors
  • Clogged or restricted fuel injector
  • Low fuel pressure
  • Faulty fuel pump
  • Contaminated fuel
  • Engine control module (ECM) issues
  • Software glitches or outdated firmware
  • Exhaust aftertreatment system blockages
  • Vacuum leaks in the system

Common misdiagnoses

  • Faulty fuel injector
  • Clogged fuel filter
  • Defective fuel pump
  • Exhaust leaks
  • Faulty engine control module (ECM)
  • Wiring or connector issues
  • Incorrect fuel type
  • Air intake issues
  • Faulty oxygen sensors
  • EGR system problems

Troubleshooting steps

  1. 1. Check for Additional Codes

    Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are other issues present

  2. 2. Inspect the Exhaust Aftertreatment System

    Visual Inspection: Check the exhaust aftertreatment system for any visible damage, leaks, or blockages

  3. 3. DEF Injector

    Inspect the DEF injector for clogs, leaks, or damage. Ensure that it is properly connected and functioning

  4. 4. Check DEF Quality and Level

    Ensure that the DEF is of good quality and not contaminated. Low-quality DEF can cause performance issues

  5. 5. Verify that the DEF tank is adequately filled. Low levels can lead to injector performance issues

  6. 6. Test the DEF Injector

    Use a scan tool to perform a functional test of the DEF injector. Check if it is operating correctly and delivering the appropriate amount of fluid

  7. 7. Measure the injector's resistance with a multimeter to ensure it is within specifications

  8. 8. Inspect Wiring and Connectors

    Check the wiring and connectors related to the DEF injector for any signs of damage, corrosion, or loose connections. Repair or replace as necessary

  9. 9. Check for Software Updates

    Verify if there are any software updates available for the vehicle’s engine control module (ECM) that may address known issues related to the P20CC code

  10. 10. Examine the SCR System

    Inspect the SCR catalyst for any signs of damage or blockage. A malfunctioning SCR can lead to performance issues with the DEF injector

  11. 11. Check the temperature sensors and pressure sensors in the SCR system to ensure they are functioning correctly

  12. 12. Perform a System Reset

    After addressing any identified issues, clear the trouble codes and perform a test drive to see if the code returns

  13. 13. Consult Technical Service Bulletins (TSBs)

    Check for any TSBs related to the P20CC code for your specific vehicle make and model. Manufacturers may have specific recommendations or known fixes

  14. 14. Seek Professional Help

    If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or dealership for further diagnosis and repair. By following these troubleshooting steps, you can systematically identify and resolve the issue associated with the P20CC code