WOMS
P code powertrain High severity

P210D Throttle Actuator "B" Control Motor Circuit High

The OBD2 code P210D indicates that there is a high voltage issue in the throttle actuator "B" control motor circuit, which can affect the throttle's operation and performance

Definition

The OBD2 code P210D indicates that there is a high voltage issue in the throttle actuator "B" control motor circuit, which can affect the throttle's operation and performance

Common causes

  • Faulty throttle actuator
  • Wiring issues (shorts or open circuits)
  • Poor electrical connections
  • Failed throttle position sensor
  • Malfunctioning engine control module (ECM)
  • Vacuum leaks
  • Corroded connectors
  • Throttle body contamination or damage

Common misdiagnoses

  • Throttle body failure
  • Faulty accelerator pedal position sensor
  • Wiring issues or shorts in the circuit
  • Engine control module (ECM) failure
  • Vacuum leaks
  • Mass air flow sensor issues
  • Fuel delivery problems
  • Ignition system faults

Troubleshooting steps

  1. 1. Check for Additional Codes

    Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues

  2. 2. Inspect Throttle Body and Actuator

  3. 3. Visually inspect the throttle body and the throttle actuator for any signs of damage, dirt, or carbon buildup. Clean the throttle body if necessary

  4. 4. Check the throttle actuator for proper operation. If it is stuck or not moving freely, it may need to be replaced

  5. 5. Examine Wiring and Connectors

  6. 6. Inspect the wiring harness and connectors related to the throttle actuator for any signs of damage, corrosion, or loose connections. Pay special attention to the wiring that leads to the throttle actuator

  7. 7. Repair or replace any damaged wiring or connectors

  8. 8. Test the Throttle Actuator

  9. 9. Use a multimeter to test the resistance and voltage of the throttle actuator. Compare the readings to the specifications in the vehicle's service manual

  10. 10. If the readings are outside the specified range, the throttle actuator may be faulty and require replacement

  11. 11. Check the Throttle Position Sensor (TPS)

  12. 12. The throttle position sensor works in conjunction with the throttle actuator. Test the TPS for proper operation and ensure it is providing accurate readings to the engine control module (ECM)

  13. 13. If the TPS is faulty, it may need to be replaced

  14. 14. Inspect the Engine Control Module (ECM)

  15. 15. In rare cases, the issue may be related to the ECM itself. Check for any software updates or reprogramming that may be necessary

  16. 16. If all other components test good, consider having the ECM tested or replaced

  17. 17. Clear Codes and Test Drive

  18. 18. After performing repairs or replacements, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns

  19. 19. Consult Technical Service Bulletins (TSBs)

  20. 20. Check for any TSBs related to the P210D code for your specific vehicle make and model. Manufacturers may have issued guidance or fixes for known issues

  21. 21. Seek Professional Help

  22. 22. If you are unable to resolve the issue after these steps, it may be best to consult a professional mechanic or technician who has experience with your vehicle's make and model. By following these troubleshooting steps, you should be able to identify and resolve the issue related to the P210D code