WOMS
P code powertrain Medium severity

P28C6 Transmission Control Module (TCM) Performance

The OBD2 code P28C6 indicates that the Transmission Control Module (TCM) is experiencing performance issues, which may involve improper shifting, delayed engagement, or other transmission-related problems

Definition

The OBD2 code P28C6 indicates that the Transmission Control Module (TCM) is experiencing performance issues, which may involve improper shifting, delayed engagement, or other transmission-related problems

Common causes

  • Faulty Transmission Control Module (TCM)
  • Wiring issues or damaged connectors
  • Low transmission fluid level or poor fluid condition
  • Faulty transmission sensors (e.g., speed sensors)
  • Software issues or outdated TCM programming
  • Internal transmission problems
  • Electrical shorts or open circuits in the TCM circuit
  • Poor ground connections

Common misdiagnoses

  • Faulty Transmission Control Module (TCM)
  • Wiring issues or short circuits in TCM harness
  • Faulty transmission sensors (e.g., speed sensors)
  • Low transmission fluid levels or fluid quality issues
  • Malfunctioning engine control module (ECM)
  • Incorrectly calibrated or programmed TCM
  • Mechanical transmission issues (e.g., slipping or binding)
  • Faulty throttle position sensor (TPS)
  • Issues with the vehicle's electrical system (e.g., battery or alternator problems)

Troubleshooting steps

  1. 1. Check for Additional Codes

    Use an OBD-II scanner to check for any other related trouble codes. Sometimes, multiple codes can provide more context for the issue

  2. 2. Inspect Wiring and Connectors

    Examine the wiring and connectors related to the TCM for any signs of damage, corrosion, or loose connections. Pay special attention to the harness that connects to the TCM

  3. 3. Check TCM Power and Ground

    Ensure that the TCM is receiving proper power and ground. Use a multimeter to check voltage at the TCM connector. Refer to the vehicle's service manual for the correct voltage specifications

  4. 4. Inspect Transmission Fluid

    Check the transmission fluid level and condition. Low or dirty fluid can cause performance issues. If the fluid is low, top it off with the correct type of fluid. If it’s dirty, consider a fluid change

  5. 5. Test the TCM

    If the wiring and connections are good, the next step is to test the TCM itself. This may involve using specialized diagnostic equipment or software to check for proper operation

  6. 6. Check for Mechanical Issues

    Inspect the transmission for any mechanical problems that could affect performance, such as slipping gears, worn components, or other internal issues

  7. 7. Update Software/Firmware

    Sometimes, a software update for the TCM can resolve performance issues. Check with the manufacturer or a dealership to see if there are any updates available

  8. 8. Clear Codes and Test Drive

    After performing any repairs or adjustments, clear the trouble codes and take the vehicle for a test drive to see if the code returns

  9. 9. Consult Technical Service Bulletins (TSBs)

    Check for any TSBs related to the specific make and model of the vehicle. Manufacturers often release TSBs for known issues that can provide guidance on troubleshooting and repairs

  10. 10. Seek Professional Help

    If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or transmission specialist for further diagnosis. Always refer to the vehicle's service manual for specific procedures and specifications related to the TCM and transmission system