WOMS
P code powertrain Medium severity

P28E6 Transmission Control Module (TCM) Performance

The OBD2 code P28E6 indicates that the Transmission Control Module (TCM) is experiencing performance issues, which may involve improper shifting, delayed engagement, or other transmission-related problems

Definition

The OBD2 code P28E6 indicates that the Transmission Control Module (TCM) is experiencing performance issues, which may involve improper shifting, delayed engagement, or other transmission-related problems

Common causes

  • Faulty Transmission Control Module (TCM)
  • Wiring issues or damaged connectors
  • Low transmission fluid levels
  • Contaminated or degraded transmission fluid
  • Faulty transmission sensors (e.g., speed sensors)
  • Software issues or outdated TCM programming
  • Mechanical transmission problems
  • Electrical issues, such as short circuits or open circuits in the TCM circuit

Common misdiagnoses

  • Faulty Transmission Control Module (TCM)
  • Wiring issues or short circuits
  • Faulty sensors (e.g., speed sensors)
  • Low transmission fluid levels
  • Transmission fluid contamination
  • Mechanical transmission issues
  • Engine control module (ECM) problems
  • Incorrectly calibrated transmission
  • Software issues or outdated firmware
  • Electrical connector problems

Troubleshooting steps

  1. 1. Check for Additional Codes

    Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help pinpoint the issue

  2. 2. Inspect Wiring and Connectors

    Examine the wiring and connectors related to the TCM for any signs of damage, corrosion, or loose connections. Pay special attention to the harness that connects to the TCM

  3. 3. Check TCM Power and Ground

    Ensure that the TCM is receiving proper power and ground. Use a multimeter to check the voltage at the TCM connector. Refer to the vehicle's service manual for the correct voltage specifications

  4. 4. Inspect Transmission Fluid

    Check the transmission fluid level and condition. Low or dirty fluid can cause performance issues. If the fluid is low, top it off with the correct type of fluid. If it’s dirty, consider a transmission fluid change

  5. 5. Test the TCM

    If the wiring and connections are good, the next step is to test the TCM itself. This may involve using specialized diagnostic equipment or software to check for proper operation

  6. 6. Check for Mechanical Issues

    Inspect the transmission for any mechanical problems that could affect performance, such as slipping gears, worn components, or other internal issues

  7. 7. Update Software/Firmware

    Sometimes, performance issues can be resolved by updating the TCM software or firmware. Check with the manufacturer or a dealership for any available updates

  8. 8. Clear Codes and Test Drive

    After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns

  9. 9. Consult a Professional

    If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or transmission specialist for further diagnosis. Always refer to the specific vehicle's service manual for detailed procedures and specifications, as the troubleshooting steps can vary based on the make and model of the vehicle