WOMS
U code network Medium severity

U1152 SCP (J1850) Invalid or Missing Data for Experimental #3

The OBD2 code U1152 SCP (J1850) Invalid or Missing Data for Experimental #3 indicates that the vehicle's communication network is not receiving valid data from a specific module or sensor, which is identified as...

Definition

The OBD2 code U1152 SCP (J1850) Invalid or Missing Data for Experimental #3 indicates that the vehicle's communication network is not receiving valid data from a specific module or sensor, which is identified as "Experimental #3."

Common causes

  • Faulty or damaged wiring/connectors in the SCP network
  • Malfunctioning or disconnected modules on the SCP network
  • Corrupted or missing data from a specific module
  • Interference from aftermarket devices or modifications
  • Software issues or bugs in the vehicle's control modules
  • Low battery voltage or poor electrical connections

Common misdiagnoses

  • Faulty wiring or connectors
  • Malfunctioning control modules
  • Sensor failures
  • Communication network issues
  • Software glitches or updates needed
  • Battery or power supply problems
  • Grounding issues

Troubleshooting steps

  1. 1. Check for Additional Codes

    Start by scanning the vehicle's OBD-II system for any additional trouble codes. Sometimes, multiple codes can provide more context for the issue

  2. 2. Inspect the Wiring and Connectors

    Examine the wiring and connectors related to the SCP (Serial Communication Protocol) bus. Look for any signs of damage, corrosion, or loose connections that could affect communication

  3. 3. Verify Battery Voltage

    Ensure that the vehicle's battery is fully charged and that the voltage is within the normal range (typically 12.4 to 12.6 volts). Low voltage can cause communication issues

  4. 4. Check Ground Connections

    Inspect the ground connections for the modules involved in the SCP communication. Poor ground connections can lead to communication failures

  5. 5. Test the SCP Bus

    Use a scan tool to monitor the SCP bus for activity. Check if other modules are communicating properly. If other modules are also showing communication issues, the problem may be with the bus itself

  6. 6. Inspect Modules

    If the issue seems isolated to a specific module, inspect that module for faults. This may involve checking for updates or reprogramming the module if necessary

  7. 7. Look for Intermittent Issues

    Sometimes, communication issues can be intermittent. Pay attention to when the code appears (e.g., during specific driving conditions) and check for any patterns

  8. 8. Check for Software Updates

    Verify if there are any software updates available for the vehicle's modules. Manufacturers may release updates to address known communication issues

  9. 9. Perform a Hard Reset

    Disconnect the battery for a few minutes to reset the vehicle's computer systems. Reconnect and see if the code reappears

  10. 10. Consult Technical Service Bulletins (TSBs)

    Check for any TSBs related to the specific make and model of the vehicle. Manufacturers may have documented known issues and solutions. 1

  11. 11. Professional Diagnosis

    If the issue persists after performing the above steps, consider seeking help from a professional technician or dealership. They may have specialized tools and knowledge to diagnose complex communication issues. By following these steps, you can systematically identify and resolve the underlying cause of the U1152 code