WOMS
U code network Medium severity

U1359 Invalid Data Received from Vehicle Control Module

The OBD2 code U1359 indicates that the vehicle's control module has received invalid or corrupted data from another control module, which may affect vehicle performance or functionality

Definition

The OBD2 code U1359 indicates that the vehicle's control module has received invalid or corrupted data from another control module, which may affect vehicle performance or functionality

Common causes

  • Faulty Vehicle Control Module (VCM)
  • Poor or damaged wiring/connectors
  • Corrupted software or firmware in the VCM
  • Communication issues between modules
  • Faulty sensors sending incorrect data
  • Low battery voltage or electrical issues
  • Grounding problems in the vehicle's electrical system

Common misdiagnoses

  • Faulty Vehicle Control Module (VCM)
  • Wiring issues or shorts in the communication lines
  • Faulty sensors or actuators
  • Corrupted software or firmware in the VCM
  • Issues with the power supply to the VCM
  • Problems with other control modules affecting communication
  • Incorrectly installed aftermarket accessories or modifications

Troubleshooting steps

  1. 1. Check for Additional Codes

    Use an OBD-II scanner to check for any other trouble codes that may be present. Addressing related codes can help pinpoint the issue

  2. 2. Inspect Wiring and Connectors

  3. 3. Examine the wiring and connectors associated with the control modules involved. Look for signs of damage, corrosion, or loose connections

  4. 4. Pay special attention to the wiring harnesses that connect the modules, as these can be prone to wear and tear

  5. 5. Check for Software Updates

  6. 6. Verify if there are any software updates available for the vehicle's control modules. Manufacturers sometimes release updates to fix bugs or improve communication between modules

  7. 7. Inspect Control Modules

  8. 8. If the issue persists, consider inspecting the control modules themselves for signs of damage or failure. This may involve checking for burnt components or other physical damage

  9. 9. Test the Control Modules

  10. 10. If you have access to diagnostic tools, perform tests on the control modules to ensure they are functioning correctly. This may include checking for proper voltage and ground

  11. 11. Clear Codes and Test Drive

  12. 12. After performing inspections and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns

  13. 13. Check for Ground Issues

  14. 14. Ensure that all ground connections for the control modules are secure and free of corrosion. Poor grounding can lead to communication issues

  15. 15. Look for Intermittent Issues

  16. 16. If the code is intermittent, monitor the vehicle's performance and check for specific conditions that may trigger the code, such as temperature changes or specific driving conditions

  17. 17. Consult Technical Service Bulletins (TSBs)

  18. 18. Check for any TSBs related to the U1359 code for your specific vehicle make and model. Manufacturers may have documented common issues and solutions

  19. 19. Seek Professional Help

  20. 20. If you are unable to resolve the issue after following these steps, consider seeking assistance from a qualified mechanic or dealership. They may have access to specialized diagnostic equipment and expertise. By following these troubleshooting steps, you can systematically identify and address the underlying cause of the U1359 code