WOMS
U code network Medium severity

U2919 Lost Communication with the Steering Angle Sensor

The OBD2 code U2919 indicates a loss of communication with the steering angle sensor, which may affect the vehicle's stability control and steering functions

Definition

The OBD2 code U2919 indicates a loss of communication with the steering angle sensor, which may affect the vehicle's stability control and steering functions

Common causes

  • Faulty steering angle sensor
  • Damaged wiring or connectors
  • Poor electrical connections
  • Malfunctioning power supply to the sensor
  • Software issues or calibration errors
  • Faulty vehicle control module (VCM)
  • Interference from other electronic components

Common misdiagnoses

  • Faulty Steering Angle Sensor
  • Wiring Issues or Short Circuits
  • Faulty Body Control Module (BCM)
  • Faulty Electronic Power Steering (EPS) Module
  • Incorrectly Calibrated Steering Angle Sensor
  • Faulty ABS Module
  • Issues with the CAN Bus Communication
  • Battery or Power Supply Problems

Troubleshooting steps

  1. 1. Check for Other Codes

    Use an OBD-II scanner to check for any additional trouble codes. Sometimes, multiple codes can provide more context for the issue

  2. 2. Inspect Wiring and Connectors

    Visual Inspection: Check the wiring harness and connectors associated with the steering angle sensor for any signs of damage, corrosion, or loose connections

  3. 3. Connector Pins

    Ensure that the pins in the connectors are not bent, corroded, or pushed back

  4. 4. Test the Steering Angle Sensor

    Sensor Functionality: If possible, test the steering angle sensor using a multimeter or scan tool to ensure it is functioning correctly. Check for proper voltage and resistance values as specified by the manufacturer

  5. 5. Calibration

    Some vehicles require the steering angle sensor to be calibrated after installation or repair. Check if calibration is necessary

  6. 6. Check the CAN Bus Communication

    Network Integrity: Inspect the CAN bus wiring for shorts, opens, or other issues. Use a scan tool to monitor the communication between modules

  7. 7. Module Functionality

    Ensure that other modules on the CAN bus are functioning correctly, as a failure in one module can affect communication

  8. 8. Inspect the Power and Ground

    Power Supply: Verify that the steering angle sensor is receiving the correct voltage. Check the vehicle’s fuse box for any blown fuses related to the steering system

  9. 9. Ground Connections

    Ensure that the ground connections for the steering angle sensor are secure and free of corrosion

  10. 10. Check for Software Updates

    ECU Updates: Check if there are any software updates available for the vehicle’s ECU that may address communication issues

  11. 11. Clear Codes and Test Drive

    After performing the above checks and repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns

  12. 12. Consult Technical Service Bulletins (TSBs)

    Look for any TSBs related to the steering angle sensor or communication issues for your specific vehicle make and model. Manufacturers may have specific fixes or recommendations

  13. 13. Professional Diagnosis

    If the issue persists after performing the above steps, consider seeking help from a professional mechanic or dealership, as they may have specialized tools and knowledge to diagnose complex issues. By following these steps, you should be able to identify and resolve the issue related to the U2919 code. Always refer to the vehicle’s service manual for specific procedures and specifications