Why did my Wheel Speed Sensor fail?
The location of the ABS Wheel Speed Sensor mean that it is exposed to dirt, debris, water and heat. These can result in wear or damage to the sensor. These sensor typically fail in one of the following ways:
- Damage during the installation or repair of other braking or axle components
- Internal shorting
- Internal excessive resistance
- Broken wire(s)
- Increased wheel bearing clearance
How do I know I need an ABS Wheel Speed Sensor?
When an ABS Wheel Speed Sensor goes out there are some common symptoms. Some of these are manufacture specific. Here is what you will likely experience when one of these sensors has failed.
- ABS Light illuminated on dash
- Service Traction control or Service Stability System messages on driver info center
- ESC, ESP, or DSP lights
- Traction Control Off light will illuminate
- Heading the traction control system engage the ABS pump when it normally wouldn’t
- The ABS and Brake warning lights may only turn on intermittently.
While it is fine to drive a vehicle with these warning lights on, it does mean those systems are disabled. These systems are designed to help you maintain control of your vehicle during emergency braking, or other emergency maneuvers.
What does the Wheel Speed Sensor do?
The ABS Wheel sensor monitors the rotation speed of wheel. This is done to optimize braking via the Anti-Lock Braking System. It also aids in providing data to a vehicles traction control system, to reduce wheel slipping during low-traction events. The sensor is typically mounted at at each wheel. The system is comprised of a tone ring positioned on the axle and a reluctor wheel. The axle rotates with the wheel and the sensor detects this movement by either a magnetic induction or hall effect. The data related to the wheels rotation is delivered to your vehicles ABS control module.
This data is used by the ABS control module to determine when to active the ABS system, and how much braking pressure to apply to stop your vehicle without locking up the brakes. This is a great safety feature, as it reduces stopping distance and allows for better vehicle control during emergency braking situations. The wheel speed information is also delivered to other systems such as the engine, transmission, chassis control system and even the navigation system, depending on your vehicle. This is done via data lines used by your vehicles various computer control modules.
How much will it cost?
The typical cost for the testing and sensor replacement is between 180-$550 for parts and labor. This price range is averaged across all passenger vehicles. The actual cost depends on your specific make, model and year. Depending on your specific vehicle, this cost may be lower or higher. This cost estimate is for the specific repair listed and doesn’t include additional, related items that may require repair.
What is included:
- Confirm the ABS Wheel Speed Sensor is faulty
- Replace the sensor
- Replacement of wheel hub assembly, if the sensor built in.
- Parts typical include a limited life time warranty.
How it works
Request a service:
Get a quote online or set-up a time to have your vehicle looked at.
Choose your service time:
Pick time slots that work for you, easily, online. We will confirm appointments and send reminders.
Get your vehicle repaired:
No waiting at the shop. Our mechanics bring everything that is needed to you. All you have to do is provided a safe area for the work to be performed.
What what need from you
A safe place to work on your vehicle:
No working on the side of busy roads, No working on unstable or steep surfaces. We do not perform repairs during severe weather.
Authorization from a property owner or management.
If you rent please ensure work can be performed where your vehicle is. If your repair work is being done in a parking lot or at your place of employment, please ensure you have permission to have work performed. We do not do repairs in areas restricted by law.
How is Fixitfor.us different from other repair shops?
Our service is an on-demand approach. Unlike traditional shops, there is no additional time taken out of your day. There is no need to arrange dropping off your vehicle, no need sit in a waiting room and we help avoid towing your vehicle to the shop if its undrivable.
Why should I choose mobile vehicle repair?
Save yourself time and energy. No need to spend your off-time arranging how to get your vehicle to and from the repair shop. Schedule your repair and go about your day.
Do you service all makes and models?
Yes. We are able to serivce all manufactures. Our technicnas have the required tools and experience.
What type of parts does Fixitfor.us use?
All parts we use are designed to meet or exceed OE quality.
What should I expect during my appointment?
After you request a free quote you will receive an estimate, which is our best guess, based on the information you provided. Our technician will arrive your location with all tools and parts required for the repair. They will inspect the vehicle and get your approval for any changes or additional work that needs to be done.
Am I in our service area?
Our primary service area is greater Grand Rapids, including Comstock Park, Kentwood, Walker and Wyoming.
We will travel, to other locations in west Michigan including Holland, Kalamazoo, Muskegon and their surrounding areas.
What our customers say:
Kassidy Garza2023-09-26I contacted SEVEN auto shops and none responded. Aaron actually reached out to me through Yelp & I am SO THANKFUL HE DID!! Him & his partner came and were able to get my alternator done in two hours! Also charged way cheaper than one shop quoted me for. HIGHLY RECOMMEND!!Edixx Avey2023-03-24They are not good at there job they need more practice at what there doing they need to go back to mechanic schoolRichard Alvarez2022-11-21I was expecting to pay for at least service just replacement of screw need I say more
Kassidy Garza2023-09-26I contacted SEVEN auto shops and none responded. Aaron actually reached out to me through Yelp & I am SO THANKFUL HE DID!! Him & his partner came and were able to get my alternator done in two hours! HIGHLY RECOMMEND!!Lisa Mclean2021-07-15got my egr valve, hood supports, and new keys programmed on a chrysler 300 for way cheaper than the dealer, and was very easy because they come to you.Brandon Carpenter2020-07-03is not licensed or insured and will break your car no more
