B1201 – Fuel Sender Circuit Failure

The ODBII code B1201 indicates a malfunction in the fuel sender circuit, which is responsible for measuring the fuel level in the tank.

The severity of ODBII code B1201 Fuel Sender Circuit Failure is moderate.

Common Causes For: B1200 Climate Control Pushbutton Circuit Failure

• Faulty fuel level sensor
• Damaged wiring or connectors
• Short circuit in the fuel sender circuit
• Open circuit in the fuel sender circuit
• Corroded connectors
• Failed fuel pump module
• Issues with the engine control module (ECM)

Common misdiagnosis for B1201 Fuel Sender Circuit Failure

• Faulty fuel gauge
• Bad fuel pump
• Wiring issues unrelated to the sender
• Instrument cluster malfunction
• ECM/PCM failure
• Grounding issues
• Fuel level sensor failure

Common Troubleshooting Steps

The OBD-II code B1201 indicates a “Fuel Sender Circuit Failure.” This code typically relates to issues with the fuel level sensor or the circuit that connects it to the vehicle’s engine control module (ECM) or body control module (BCM). Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues.
• Inspect the Fuel Sender Unit: **Location: The fuel sender is usually located in the fuel tank.
• **Visual Inspection: Check for any visible damage, corrosion, or loose connections at the fuel sender unit.
• **Connector Check: Ensure that the electrical connector to the fuel sender is secure and free of corrosion.
• Test the Fuel Level Sensor: **Resistance Test: Use a multimeter to measure the resistance of the fuel level sensor. Compare the readings to the specifications provided in the vehicle’s service manual.
• **Functionality Test: If possible, manually move the float arm (if applicable) to see if the resistance changes accordingly.
• Inspect Wiring and Connectors: **Wiring Inspection: Check the wiring harness leading to the fuel sender for any signs of damage, fraying, or shorts.
• **Continuity Test: Perform a continuity test on the wires to ensure there are no breaks in the circuit.
• Check the Ground Connection: Ensure that the ground connection for the fuel sender circuit is secure and free of corrosion. A poor ground can lead to circuit failures.
• Examine the Fuel Pump Module: In some vehicles, the fuel sender is part of the fuel pump module. If the module is faulty, it may affect the fuel sender’s operation.
• Inspect the Body Control Module (BCM): If all other components check out, the issue may lie with the BCM. Check for any software updates or known issues with the BCM related to fuel sender circuits.
• Clear Codes and Test Drive: After performing repairs or replacements, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult a Professional: If the issue persists after performing these steps, it may be best to consult a professional mechanic or technician who has experience with your specific vehicle make and model.Additional Tips: – Always refer to the vehicle’s service manual for specific diagnostic procedures and specifications. – Safety first: If working on the fuel system, ensure the vehicle is properly ventilated and take necessary precautions to avoid fire hazards. By following these troubleshooting steps, you should be able to identify and resolve the issue related to the B1201 code.