B1265 – Servo Motor Coolair Bypass Circuit Failure

The ODBII code B1265 indicates a failure in the servo motor circuit responsible for controlling the cool air bypass in the vehicle’s climate control system.

The severity of ODBII code B1265 is moderate.

Common Causes For: B1264 Servo Motor Foot Circuit Failure

• Faulty servo motor
• Damaged wiring or connectors
• Short circuit in the bypass circuit
• Open circuit in the bypass circuit
• Failed control module
• Poor ground connection
• Corroded terminals or connectors
• Malfunctioning HVAC control system

Common misdiagnosis for B1265 Servo Motor Coolair Bypass Circuit Failure

• Faulty HVAC control module
• Wiring issues or shorts in the circuit
• Malfunctioning temperature sensors
• Defective servo motor or actuator
• Low refrigerant levels
• Faulty blend door or actuator
• Issues with the climate control system
• Battery or electrical system problems

Common Troubleshooting Steps

The OBD-II code B1265 indicates a problem with the servo motor bypass circuit for the cool air system, which is typically related to the HVAC (Heating, Ventilation, and Air Conditioning) system in a vehicle. Here are some common troubleshooting steps to diagnose and potentially resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues.
• Inspect the Wiring and Connectors:
• Visually inspect the wiring and connectors associated with the servo motor and the HVAC system. Look for signs of damage, corrosion, or loose connections.
• Ensure that all connectors are securely attached and that there are no broken wires.
• Test the Servo Motor:
• If accessible, test the servo motor for proper operation. You can do this by applying direct power to the motor to see if it moves as expected.
• If the motor does not operate correctly, it may need to be replaced.
• Check the HVAC Control Module:
• The HVAC control module may be malfunctioning. Check for proper operation and any signs of failure.
• If possible, perform a reset or reprogramming of the module.
• Inspect the Fuses:
• Check the fuses related to the HVAC system and the servo motor circuit. A blown fuse can cause the circuit to fail.
• Test the Power and Ground:
• Use a multimeter to check for proper voltage and ground at the servo motor connector. Ensure that the motor is receiving the correct voltage when commanded by the HVAC control module.
• Check for Obstructions:
• Ensure that there are no obstructions preventing the servo motor from moving freely. Sometimes debris or foreign objects can block the movement of the actuator.
• Perform a Calibration:
• Some vehicles require a calibration procedure for the HVAC system after repairs. Consult the vehicle’s service manual for specific calibration instructions.
• Consult Technical Service Bulletins (TSBs):
• Check for any TSBs related to the B1265 code for your specific vehicle make and model. Manufacturers may have issued guidance or solutions for known issues.
• Seek Professional Help:
• If the issue persists after performing these steps, it may be best to consult a professional mechanic or technician who has experience with your vehicle’s HVAC system. By following these steps, you should be able to identify the cause of the B1265 code and take appropriate action to resolve the issue.