B1266 – Servo Motor Airintake Left Circuit Failure
The ODBII code B1266 indicates a failure in the left circuit of the servo motor responsible for controlling the air intake, which may affect the operation of the vehicle’s air intake system.
The severity of ODBII code B1266 is generally considered moderate.
Common Causes For: B1265 Servo Motor Coolair Bypass Circuit Failure
- Faulty servo motor
- Damaged wiring or connectors
- Short circuit in the circuit
- Open circuit in the circuit
- Failed control module
- Poor ground connection
- Corroded connectors
- Mechanical obstruction in the intake system
Common misdiagnosis for B1266 Servo Motor Airintake Left Circuit Failure
- Faulty throttle body
- Air intake sensor issues
- Vacuum leaks
- Wiring or connector problems
- ECM/PCM failure
- Faulty mass air flow sensor
- Intake manifold gasket leaks
- Problems with the air filter or housing
Common Troubleshooting Steps
The OBD-II code B1266 indicates a “Servo Motor Air Intake Left Circuit Failure.” This code is typically associated with issues in the air intake system, particularly with the servo motor that controls the air intake on the left side. Here are some common troubleshooting steps to diagnose and potentially resolve this issue:
- Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues.
- Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the servo motor. Look for signs of damage, corrosion, or loose connections.
- Ensure that all connectors are securely attached and free of dirt or moisture.
- Test the Servo Motor: If accessible, test the servo motor for proper operation. You can do this by applying direct power to the motor to see if it moves as expected.
- If the motor does not operate correctly, it may need to be replaced.
- Check for Vacuum Leaks: Inspect the air intake system for any vacuum leaks that could affect the operation of the servo motor. Use a smoke machine or carburetor cleaner to help identify leaks.
- Inspect the Air Intake System: Check the entire air intake system for blockages or restrictions that could affect airflow. Ensure that the air filter is clean and properly installed.
- Test the Control Module: The issue may be related to the control module that operates the servo motor. Check for proper voltage and ground at the motor connector.
- If possible, test the control module for faults or issues.
- Check for Software Updates: Sometimes, manufacturers release software updates that can resolve known issues. Check with the dealership or manufacturer for any available updates for your vehicle’s ECU.
- Clear Codes and Test Drive: After performing any repairs or adjustments, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
- Consult Repair Manual: Refer to the vehicle’s service manual for specific diagnostic procedures and specifications related to the air intake system and servo motor.
- Seek Professional Help: If the issue persists after performing these steps, it may be best to consult a professional mechanic or technician who has experience with your specific vehicle make and model. By following these troubleshooting steps, you can systematically identify and address the cause of the B1266 code.