B1268 – Servo Motor Potentiometer Defrost Circuit Failure

By Fixitfor.us |
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ODBII code B1268 indicates a failure in the defrost circuit related to the servo motor potentiometer, which is responsible for controlling the defrost function in the vehicle’s climate control system.

The severity of ODBII code B1268 is moderate.

Common Causes For: B1267 Servo Motor Airintake Right Circuit Failure

  • Faulty servo motor
  • Damaged wiring or connectors
  • Failed potentiometer
  • Short circuit in the defrost circuit
  • Open circuit in the defrost circuit
  • Corrosion or poor connections
  • Malfunctioning HVAC control module
  • Software issues in the vehicle’s control system

Common misdiagnosis for B1268 Servo Motor Potentiometer Defrost Circuit Failure

  • Faulty HVAC control module
  • Defective servo motor
  • Wiring issues or shorts in the circuit
  • Malfunctioning temperature sensors
  • Incorrectly calibrated potentiometer
  • Issues with the climate control system
  • Low refrigerant levels
  • Faulty blend door actuator

Common Troubleshooting Steps

The OBD-II code B1268 indicates a problem with the servo motor potentiometer in the defrost circuit of a vehicle’s HVAC (Heating, Ventilation, and Air Conditioning) system. This code typically points to an issue with the position sensor or the servo motor that controls the airflow for defrosting. Here are some common troubleshooting steps to diagnose and potentially resolve the issue:

  • Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues.
  • Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the servo motor and potentiometer. Look for signs of damage, corrosion, or loose connections.
  • Ensure that all connectors are securely attached and free of dirt or moisture.
  • Test the Servo Motor: Manually test the servo motor to ensure it operates correctly. You can do this by applying power directly to the motor and observing its movement.
  • If the motor does not respond, it may need to be replaced.
  • Check the Potentiometer: Use a multimeter to test the potentiometer for proper resistance values. The resistance should change smoothly as the potentiometer is moved.
  • If the potentiometer is faulty, it may need to be replaced.
  • Inspect the HVAC Control Module: Check the HVAC control module for any signs of damage or malfunction. If the module is not sending the correct signals to the servo motor, it may need to be reprogrammed or replaced.
  • Look for Vacuum Leaks (if applicable): Some HVAC systems use vacuum actuators. Check for any vacuum leaks in the system that could affect the operation of the defrost circuit.
  • Clear Codes and Test Drive: After performing any repairs or replacements, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
  • Consult Service Manual: Refer to the vehicle’s service manual for specific diagnostic procedures and specifications related to the HVAC system and the B1268 code.
  • Seek Professional Help: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who has experience with HVAC systems and OBD-II diagnostics. By following these steps, you should be able to identify and resolve the issue related to the B1268 code. Always ensure safety precautions are taken when working on vehicle electrical systems.

Leave a Comment

You must be logged in to post a comment.