B1289 – Servo Motor Potentiometer Airintake Right Circuit Open

The ODBII code B1289 indicates that there is an open circuit in the servo motor potentiometer for the right air intake, which affects the proper functioning of the air intake system.

The severity of ODBII code B1289 is moderate.

Common Causes For: B1288 Servo Motor Potentiometer Airintake Right Circuit Failure

• Damaged wiring or connectors
• Faulty servo motor
• Failed potentiometer
• Poor ground connection
• Corrosion or dirt in electrical connections
• Short circuit in the circuit
• Malfunctioning engine control module (ECM)

Common misdiagnosis for B1289 Servo Motor Potentiometer Airintake Right Circuit Open

• Faulty servo motor
• Wiring issues or shorts
• Bad connectors or terminals
• Malfunctioning engine control module (ECM)
• Incorrectly calibrated throttle position sensor
• Vacuum leaks
• Faulty air intake temperature sensor
• Issues with the intake manifold or related components

Common Troubleshooting Steps

The OBD-II code B1289 indicates a problem with the servo motor potentiometer circuit for the air intake system, specifically on the right side. This code typically relates to issues with the air intake system’s actuator, which can affect engine performance and emissions. Here are some common troubleshooting steps to diagnose and resolve the issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues.
• Inspect Wiring and Connectors: Visually inspect the wiring and connectors associated with the servo motor potentiometer. Look for:
• Damaged, frayed, or corroded wires.
• Loose or disconnected connectors.
• Signs of moisture or dirt that could affect connections.
• Test the Potentiometer: Use a multimeter to test the potentiometer’s resistance. Compare the readings to the manufacturer’s specifications. If the resistance is out of range, the potentiometer may need to be replaced.
• Check the Servo Motor: Test the servo motor itself to ensure it is functioning correctly. This may involve:
• Applying power directly to the motor to see if it operates.
• Checking for any mechanical binding or obstruction that could prevent movement.
• Inspect the Air Intake System: Check the air intake system for any blockages or leaks that could affect the operation of the servo motor. Ensure that all components are securely attached and functioning properly.
• Examine the Control Module: If the wiring and components appear to be in good condition, the issue may lie with the control module. Check for:
• Software updates or reprogramming needs.
• Faulty control module that may require replacement.
• Clear Codes and Test Drive: After performing repairs or replacements, clear the trouble codes using the OBD-II scanner. Take the vehicle for a test drive to see if the code reappears.
• Consult Technical Service Bulletins (TSBs): Check for any TSBs related to the specific make and model of the vehicle. Manufacturers may have issued guidance on common issues related to the B1289 code.
• Seek Professional Help: If the issue persists after performing the above steps, it may be necessary to consult a professional mechanic or technician who has experience with the specific vehicle and its systems. By following these troubleshooting steps, you should be able to identify and resolve the issue related to the B1289 code. Always refer to the vehicle’s service manual for specific diagnostic procedures and specifications.