b1297 park assist sensor 10
B1297 Park Assist Sensor 10
OBD2 Code: B1297
Description: Park Assist Sensor 10 Circuit Malfunction
Definition: This code indicates a malfunction in the circuit of the park assist sensor labeled as number 10. It suggests there is an issue with the electrical connections or components associated with this specific sensor, which could affect the vehicle’s parking assistance system functionality.
b1297: Park Assist Sensor 10 Circuit Short To Ground – Moderate
Common Causes
b1297 park assist sensor 10
Common causes of this OBD2 code include:
- Faulty park assist sensor 10
- Wiring issues in the park assist system
- Corrosion or poor connections in the sensor circuit
- Defective control module for the park assist system
Common Misdiagnosis
html
OBD2 Code: B1297
Description: Park Assist Sensor 10
Common Misdiagnosis: Faulty sensor wiring or connections are often misdiagnosed as a defective park assist sensor.
Common Diagnostic Steps
html
OBD2 Code: B1297
Description: Park Assist Sensor 10
Common Diagnostic Steps:
- Verify the fault code using an OBD-II scanner.
- Inspect the park assist sensor for any physical damage or obstructions.
- Check the wiring and connectors related to sensor 10 for signs of corrosion, damage, or disconnection.
- Test the voltage and ground supply at the sensor connector using a multimeter.
- Use a scan tool to monitor live data from the park assist sensors to identify any irregular readings from sensor 10.
- If possible, swap sensor 10 with another known good sensor to see if the fault follows the sensor or stays in place.
- Consult vehicle-specific repair manuals for further diagnostic procedures specific to your make and model.
- If all else fails, consider replacing park assist sensor 10 with a new one as per manufacturer guidelines.