b1367 right rear door handle unlock circuit no sub type information
B1367 Right Rear Door Handle Unlock Circuit No Sub Type Information
The OBD2 code B1367 indicates a malfunction in the right rear door handle unlock circuit. This code is set when there is an issue with the electrical circuit responsible for unlocking the right rear door, which could be due to wiring problems, a faulty actuator, or a malfunctioning control module.
B1367 – Right Rear Door Handle Unlock Circuit No Sub Type Information: Moderate
Common Causes
B1367 – Right Rear Door Handle Unlock Circuit
Common Causes:
- Faulty right rear door handle
- Broken or shorted wiring in the unlock circuit
- Defective door lock actuator in the right rear door
- Corrosion or poor connections in the circuit
Common Misdiagnosis
OBD2 Code: B1367
Description: Right Rear Door Handle Unlock Circuit No Sub Type Information
Common Misdiagnosis: Replacing the door handle or lock actuator without checking for wiring issues or a faulty control module.
Common Diagnostic Steps
html
OBD2 Code: B1367
Description: Right Rear Door Handle Unlock Circuit No Sub Type Information
- Inspect the right rear door handle for any physical damage or obstruction.
- Check the wiring harness and connectors for signs of corrosion, damage, or disconnection.
- Use a multimeter to test for continuity in the circuit from the door handle to the control module.
- Verify that there is power and ground at the door lock actuator connector.
- If equipped, check for any blown fuses related to the door lock system.
- Scan for additional trouble codes that might indicate a broader issue with the vehicle’s electrical system.
- If no issues are found, consider testing or replacing the right rear door lock actuator.
