B1404 – Driver Power Window Down Circuit Open

By Fixitfor.us |
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ODBII code B1404 indicates that there is an open circuit in the driver power window down circuit, meaning the system is unable to complete the electrical path needed to operate the driver’s side window in the downward direction.

The severity of ODBII code B1404 is generally considered moderate.

Common Causes For: B1403 Driver Power Window Up Switch Circuit Failure

  • Faulty power window switch
  • Damaged wiring or connectors
  • Blown fuse
  • Malfunctioning power window motor
  • Faulty body control module (BCM)
  • Poor ground connection

Common misdiagnosis for B1404 Driver Power Window Down Circuit Open

  • Faulty power window switch
  • Defective window motor
  • Wiring issues or shorts
  • Blown fuse
  • Body control module (BCM) failure
  • Incorrectly installed window regulator
  • Ground connection problems
  • Faulty relay
  • Misinterpretation of other related codes
  • Battery or charging system issues

Common Troubleshooting Steps

The OBD-II code B1404 indicates a problem with the driver power window down circuit, specifically that there is an open circuit. Here are some common troubleshooting steps to diagnose and potentially resolve this issue:

  • Check the Fuse:: Locate the fuse box and check the fuse associated with the power windows. If the fuse is blown, replace it and see if the issue persists.
  • Inspect Wiring and Connectors:: Visually inspect the wiring and connectors related to the driver’s power window switch and motor. Look for any signs of damage, corrosion, or loose connections.
  • Test the Power Window Switch:: Use a multimeter to test the power window switch for continuity. If the switch is faulty, it may need to be replaced.
  • Check the Power Window Motor:: Test the power window motor by applying direct power to it. If the motor does not operate, it may be defective and require replacement.
  • Examine the Window Regulator:: Inspect the window regulator for any mechanical issues that may prevent the window from moving. If the regulator is damaged, it may need to be replaced.
  • Check for Ground Issues:: Ensure that the ground connections for the power window circuit are secure and free of corrosion. A poor ground can cause circuit issues.
  • Scan for Additional Codes:: Use an OBD-II scanner to check for any additional trouble codes that may provide more context or indicate related issues.
  • Inspect the Body Control Module (BCM):: If all other components check out, the issue may lie within the BCM. Check for any software updates or faults in the module.
  • Perform a Visual Inspection:: Look for any signs of water intrusion or damage in the door panel that could affect the electrical components.
  • Consult Wiring Diagrams:**
  • Refer to the vehicle’s wiring diagrams to trace the circuit and identify any potential breaks or shorts in the wiring. 1
  • Professional Diagnosis:**
  • If the issue persists after performing these steps, consider seeking help from a professional mechanic or automotive technician who can perform more advanced diagnostics. By following these steps, you should be able to identify the cause of the B1404 code and take appropriate action to resolve the issue.

Leave a Comment

You must be logged in to post a comment.