B1454 – Wiper Washer Fluid Lamp Circuit Failure

The ODBII code B1454 indicates a malfunction in the wiper washer fluid lamp circuit, which may involve a failure in the circuit that signals when the washer fluid level is low.

The severity of ODBII code B1454 is generally considered low.

Common Causes For: B1453 Wiper Wash/Delay Switch Circuit Short To Ground

• Faulty wiper washer fluid level sensor
• Damaged wiring or connectors
• Blown fuse
• Short circuit in the circuit
• Corroded terminals
• Malfunctioning body control module (BCM)
• Low washer fluid level

Common misdiagnosis for B1454 Wiper Washer Fluid Lamp Circuit Failure

• Faulty wiper washer fluid level sensor
• Wiring issues or shorts in the circuit
• Malfunctioning body control module (BCM)
• Defective wiper washer pump
• Low washer fluid level
• Corroded or loose electrical connections
• Faulty dashboard indicator light
• Software issues in the vehicle’s computer system

Common Troubleshooting Steps

The OBD-II code B1454 indicates a “Wiper Washer Fluid Lamp Circuit Failure.” This code typically relates to the vehicle’s washer fluid level sensor or the circuit that monitors the washer fluid level. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check the Washer Fluid Level:
• Ensure that the washer fluid reservoir is filled to the appropriate level. If the fluid is low or empty, refill it and see if the code clears.
• Inspect the Washer Fluid Level Sensor:
• Locate the washer fluid level sensor in the reservoir. Check for any visible damage or corrosion on the sensor and its connectors.
• If possible, test the sensor with a multimeter to ensure it is functioning correctly. The resistance should change when the fluid level changes.
• Examine Wiring and Connectors:
• Inspect the wiring and connectors leading to the washer fluid level sensor for any signs of damage, fraying, or corrosion.
• Ensure that all connections are secure and free from moisture or dirt.
• Check for Short Circuits or Open Circuits:
• Use a multimeter to check for continuity in the wiring between the sensor and the vehicle’s body control module (BCM) or instrument cluster.
• Look for any short circuits or open circuits that could be causing the failure.
• Test the BCM or Instrument Cluster:
• If the sensor and wiring are in good condition, the issue may lie within the BCM or instrument cluster. Check for any software updates or known issues related to the specific vehicle model.
• If necessary, consult a professional technician for further diagnosis of the BCM.
• Clear the Code and Test Drive:
• After performing the checks and repairs, clear the OBD-II code using a scan tool.
• Take the vehicle for a test drive to see if the code returns. Monitor the washer fluid lamp to ensure it operates correctly.
• Consult Repair Manual or Technical Service Bulletins (TSBs):
• Refer to the vehicle’s repair manual for specific diagnostic procedures related to the B1454 code.
• Check for any TSBs that may address known issues with the washer fluid lamp circuit for your vehicle make and model. If the problem persists after following these steps, it may be advisable to seek assistance from a qualified automotive technician who can perform more advanced diagnostics.