B1505 – Lamp Turn Signal Right Circuit Short To Battery

The ODBII code B1505 indicates a short circuit in the right turn signal circuit, causing it to be continuously powered as if it is connected directly to the battery.

The severity of ODBII code B1505 is moderate.

Common Causes For: B1504 Lamp Turn Signal Right Circuit Open

• Shorted wiring or connectors in the turn signal circuit.
• Faulty turn signal switch.
• Damaged or corroded ground connections.
• Malfunctioning turn signal relay.
• Incorrectly installed or damaged bulbs.
• Faulty body control module (BCM).

Common misdiagnosis for B1505 Lamp Turn Signal Right Circuit Short To Battery

• Faulty turn signal switch
• Shorted wiring harness
• Defective body control module (BCM)
• Malfunctioning relay
• Incorrect bulb installation or type
• Grounding issues
• Faulty connector or terminal corrosion

Common Troubleshooting Steps

When dealing with an OBD-II code B1505, which indicates a “Lamp Turn Signal Right Circuit Short To Battery,” there are several common troubleshooting steps you can follow to diagnose and resolve the issue. Here’s a structured approach:

• Visual Inspection: **Check Wiring and Connectors: Inspect the wiring harness and connectors associated with the right turn signal circuit for any signs of damage, fraying, or corrosion.
• **Look for Shorts: Check for any wires that may be pinched, chafed, or touching metal surfaces that could cause a short to battery.
• Check the Turn Signal Bulb: **Inspect the Bulb: Remove the right turn signal bulb and inspect it for any signs of damage or failure. Replace it if necessary.
• **Test the Bulb Socket: Check the bulb socket for corrosion or damage that could cause a poor connection.
• Test the Turn Signal Circuit: **Use a Multimeter: With the turn signal activated, use a multimeter to check for voltage at the turn signal connector. Ensure that the voltage is within the expected range.
• **Check Ground Connections: Ensure that the ground connection for the turn signal circuit is secure and free of corrosion.
• Inspect the Turn Signal Relay: **Check Relay Operation: If your vehicle has a turn signal relay, test it to ensure it is functioning properly. Replace it if it is faulty.
• Scan for Additional Codes: **Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes that may provide more context or indicate related issues.
• Check the Body Control Module (BCM): **Inspect BCM Connections: Ensure that the connections to the BCM are secure and free of corrosion.
• **Test BCM Functionality: If other troubleshooting steps do not resolve the issue, the BCM may need to be tested or reprogrammed.
• Perform a Continuity Test: **Check for Shorts: Perform a continuity test on the wiring from the BCM to the turn signal bulb to check for any shorts to battery or ground.
• Repair or Replace Faulty Components: **Replace Damaged Wires or Connectors: If any damaged wiring or connectors are found, repair or replace them as necessary.
• **Replace Faulty Components: If any components (bulb, relay, BCM) are found to be faulty, replace them.
• Clear Codes and Test Drive: **Clear the Codes: After making repairs, clear the trouble codes using an OBD-II scanner.
• **Test Drive the Vehicle: Take the vehicle for a test drive to ensure that the issue has been resolved and that the code does not return.
• Consult a Professional: If the issue persists after following these steps, it may be necessary to consult a professional mechanic or technician for further diagnosis. By following these troubleshooting steps, you should be able to identify and resolve the issue related to the B1505 code.