B1561 – Door Lock Cylinder Circuit Short To Battery

The ODBII code B1561 indicates a short circuit in the door lock cylinder circuit, causing it to connect directly to the battery, which can lead to malfunctioning of the door locking system.

The severity of ODBII code B1561 is moderate.

Common Causes For: B1560 Door Lock Cylinder Circuit Open

• Shorted wiring or connectors
• Faulty door lock cylinder
• Corroded or damaged terminals
• Malfunctioning body control module (BCM)
• Improperly installed aftermarket accessories
• Water intrusion or moisture damage
• Faulty ignition switch

Common misdiagnosis for B1561 Door Lock Cylinder Circuit Short To Battery

• Faulty door lock actuator
• Malfunctioning body control module (BCM)
• Wiring issues or shorts in the door harness
• Defective ignition switch
• Problems with the keyless entry system
• Faulty door lock relay
• Issues with the power door lock switch

Common Troubleshooting Steps

When dealing with OBD-II code B1561, which indicates a “Door Lock Cylinder Circuit Short to Battery,” there are several common troubleshooting steps you can follow to diagnose and potentially resolve the issue. Here’s a structured approach:

• Check the Vehicle’s Manual: Refer to the vehicle’s service manual for specific information related to the B1561 code, including wiring diagrams and component locations.
• Visual Inspection: Inspect the door lock cylinder and surrounding wiring for any visible damage, such as frayed wires, corrosion, or loose connections.
• Check the connectors for signs of moisture or dirt that could cause a short circuit.
• Test the Door Lock Cylinder: Use a multimeter to check the resistance of the door lock cylinder. Compare the readings to the specifications in the service manual.
• If the resistance is too low or shows continuity when it shouldn’t, the lock cylinder may be faulty.
• Check for Shorts: With the multimeter, check for continuity between the door lock cylinder circuit and the battery positive terminal. A short circuit will show continuity where there shouldn’t be any.
• Inspect the wiring harness for any signs of wear or damage that could cause a short to the battery.
• Inspect the Body Control Module (BCM): The BCM controls the door lock functions. Check for any fault codes related to the BCM and inspect its connections.
• If necessary, test the BCM for proper operation according to the manufacturer’s specifications.
• Check Fuses and Relays: Inspect the fuses related to the door lock system. Replace any blown fuses.
• Check the relays associated with the door lock system for proper operation.
• Scan for Additional Codes: Use an OBD-II scanner to check for any additional trouble codes that may provide more context or indicate related issues.
• Perform a Reset: After addressing any issues found, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
• Consult a Professional: If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or technician who has experience with your specific vehicle make and model.
• Document Findings: Keep a record of any tests performed, findings, and repairs made. This documentation can be helpful for future reference or if you need to seek professional assistance. By following these steps, you should be able to identify the cause of the B1561 code and take appropriate action to resolve the issue.