B1579 – Dim Panel Increase Input Circuit Failure

The ODBII code B1579 indicates a failure in the dim panel increase input circuit, which typically relates to issues with the vehicle’s dashboard lighting control system.

The severity of ODBII code B1579 is generally considered moderate.

Common Causes For: B1578 Lamp Park Input Circuit Short To Ground

• Faulty dimmer switch
• Wiring issues (shorts or open circuits)
• Poor connections or corroded terminals
• Malfunctioning body control module (BCM)
• Defective instrument cluster
• Grounding problems
• Faulty sensors related to dimming function

Common misdiagnosis for B1579 Dim Panel Increase Input Circuit Failure

• Faulty instrument cluster
• Wiring issues or shorts
• Bad ground connections
• Malfunctioning body control module (BCM)
• Defective dimmer switch
• Software or firmware issues in the vehicle’s computer systems
• Incorrectly calibrated sensors or modules

Common Troubleshooting Steps

The OBD-II code B1579 refers to a “Dim Panel Increase Input Circuit Failure.” This code is typically associated with issues in the vehicle’s lighting control system, particularly the dimming function for the instrument panel or dashboard lights. Here are some common troubleshooting steps to diagnose and resolve this issue:

• Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. Sometimes, multiple codes can provide more context for the issue.
• Inspect the Dimmer Switch: **Functionality Test: Ensure that the dimmer switch is functioning properly. Test the switch by adjusting it and observing if the dashboard lights respond accordingly.
• **Connections: Check the wiring and connectors associated with the dimmer switch for any signs of damage, corrosion, or loose connections.
• Examine Wiring and Connectors: Inspect the wiring harnesses and connectors related to the dimming circuit for any signs of wear, fraying, or damage.
• Look for any short circuits or open circuits in the wiring that could affect the dimming function.
• Check the Instrument Cluster: If the dimmer switch and wiring appear to be in good condition, the issue may lie within the instrument cluster itself. Inspect the cluster for any signs of malfunction or damage.
• If possible, test the instrument cluster in another vehicle to confirm its functionality.
• Test the Body Control Module (BCM): The BCM often controls the dimming function. Check for any faults in the BCM and ensure it is receiving the correct input from the dimmer switch.
• If necessary, reprogram or replace the BCM if it is found to be faulty.
• Check Fuses: Inspect the fuses related to the instrument panel and dimming circuit. Replace any blown fuses and check if the issue persists.
• Perform a Visual Inspection: Look for any signs of water intrusion or damage in the areas where the dimming circuit components are located, as moisture can cause electrical issues.
• Consult Wiring Diagrams: Refer to the vehicle’s service manual for wiring diagrams to understand the circuit layout and identify any potential issues in the circuit path.
• Reset the System: After performing repairs, clear the trouble codes using the OBD-II scanner and see if the code returns after a test drive.
• Seek Professional Help: If the issue persists after performing these steps, it may be necessary to consult a professional mechanic or an automotive electrician for further diagnosis and repair. By following these troubleshooting steps, you should be able to identify and resolve the issue related to the B1579 code.