B1662 – Seat Driver Front Up Circuit Short To Ground

By Fixitfor.us |
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ODBII code B1662 indicates a short circuit to ground in the driver front seat up adjustment circuit, which may prevent the seat from moving up properly.

The severity of ODBII code B1662 is moderate.

Common Causes For: B1661 Seat Driver Front Up Circuit Short To Battery

  • Damaged wiring or connectors
  • Shorted seat motor
  • Faulty seat position sensor
  • Malfunctioning power seat switch
  • Grounding issues in the circuit
  • Corroded connectors or terminals
  • Faulty body control module (BCM)

Common misdiagnosis for B1662 Seat Driver Front Up Circuit Short To Ground

  • Faulty seat switch
  • Damaged wiring harness
  • Defective seat motor
  • Malfunctioning body control module (BCM)
  • Incorrectly installed seat
  • Shorted connectors
  • Grounding issues in the electrical system

Common Troubleshooting Steps

The OBD-II code B1662 indicates a problem with the driver’s front seat up circuit, specifically a short to ground. This can affect the operation of the power seat and may be related to wiring, connectors, or the seat motor itself. Here are some common troubleshooting steps to diagnose and resolve this issue:

  • Visual Inspection: **Wiring and Connectors: Inspect the wiring harness and connectors associated with the driver’s seat. Look for any signs of damage, fraying, or corrosion.
  • **Seat Motor: Check the seat motor for any visible damage or signs of wear.
  • Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes that may provide more context or indicate related issues.
  • Test the Seat Motor: **Direct Power Test: Disconnect the seat motor and apply direct power to it to see if it operates. If it does not work, the motor may be faulty and needs replacement.
  • **Resistance Test: Measure the resistance of the seat motor. If it is outside the manufacturer’s specifications, the motor may be defective.
  • Inspect Ground Connections: Check the ground connections for the seat motor and related components. A poor ground can cause a short circuit and trigger the B1662 code.
  • Check for Shorts to Ground: Use a multimeter to check for continuity between the seat motor circuit and ground. If there is continuity, there may be a short somewhere in the wiring.
  • Inspect the wiring harness for pinched or damaged wires that could be causing a short.
  • Test the Switch: If the seat has a power switch, test the switch for proper operation. A faulty switch can cause incorrect signals to be sent to the seat motor.
  • Inspect the Seat Control Module: If applicable, check the seat control module for faults. This may involve checking for proper power and ground at the module and ensuring it is functioning correctly.
  • Clear Codes and Test Drive: After performing repairs, clear the trouble codes using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
  • Consult Service Manual: Refer to the vehicle’s service manual for specific wiring diagrams and troubleshooting procedures related to the seat circuit.
  • Seek Professional Help: If the issue persists after performing these steps, it may be best to consult a professional mechanic or technician who has experience with automotive electrical systems. By following these steps, you should be able to identify and resolve the issue causing the B1662 code.

Leave a Comment

You must be logged in to post a comment.