b1695 door side airbag sensor left malfunction

B1695 Door Side Airbag Sensor Left Malfunction

OBD2 Code: B1695

Description: Door side airbag sensor left malfunction.

Definition: This code indicates a problem with the left door side airbag sensor, which may affect the deployment of the airbag in case of an accident. The issue could be due to a faulty sensor, wiring problems, or a connection issue within the airbag system.

b1695: Door Side Airbag Sensor Left Malfunction
Severity: Moderate

Common Causes

B1695 – Door Side Airbag Sensor Left Malfunction

  • Common causes of B1695 include:
    • Faulty door side airbag sensor on the left side
    • Wiring issues such as short circuits or open circuits in the sensor circuit
    • Poor electrical connection at the sensor or related components
    • Corrosion or damage to the sensor connector
    • Issues with the airbag control module that communicates with the sensor

 

Common Misdiagnosis

html

OBD2 Code: B1695

Description: Door Side Airbag Sensor Left Malfunction

Common Misdiagnosis: Replacing the airbag sensor without checking for wiring issues or connector problems.

 

Common Diagnostic Steps

html

OBD2 Code: B1695

Description: Door Side Airbag Sensor Left Malfunction

  • Check for any stored trouble codes in the vehicle’s computer system using an OBD2 scanner.
  • Inspect the wiring and connectors related to the left door side airbag sensor for any signs of damage, corrosion, or disconnection.
  • Test the continuity and resistance of the airbag sensor circuit to ensure proper electrical flow.
  • Verify that the airbag sensor is receiving power and ground as specified by the manufacturer.
  • If applicable, check for any technical service bulletins (TSBs) related to this specific code or issue.
  • If no issues are found with wiring or connections, consider replacing the left door side airbag sensor with a new one from a reputable supplier.
  • After repairs, clear all codes and test drive the vehicle to see if the code returns.

Leave a Comment

You must be logged in to post a comment.