B1717 – Seat Driver Forward Switch Circuit Failure

By Fixitfor.us |
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ODBII code B1717 indicates a malfunction in the driver’s seat forward switch circuit, which may involve issues with the switch itself, wiring, or the seat control module.

The severity of ODBII code B1717 is generally considered moderate.

Common Causes For: B1716 Seat Driver Front Down Switch Circuit Short To Ground

  • Faulty driver seat forward switch
  • Damaged wiring or connectors in the circuit
  • Short circuit in the seat switch circuit
  • Open circuit in the seat switch circuit
  • Faulty seat control module
  • Corrosion or poor connections in the wiring harness
  • Malfunctioning power supply to the switch or module

Common misdiagnosis for B1717 Seat Driver Forward Switch Circuit Failure

  • Faulty seat switch
  • Wiring issues or shorts in the circuit
  • Faulty seat control module
  • Issues with the body control module (BCM)
  • Problems with the power supply to the seat switch
  • Incorrectly diagnosed seat position sensor issues
  • Misinterpretation of related codes or symptoms

Common Troubleshooting Steps

The OBD-II code B1717 indicates a problem with the driver’s seat forward switch circuit. This code is often related to the power seat system and can be caused by various issues, including wiring problems, switch malfunctions, or issues with the seat control module. Here are some common troubleshooting steps to diagnose and potentially resolve the issue:

  • Check for Additional Codes: Use an OBD-II scanner to check for any other related trouble codes. This can provide more context and help identify if there are multiple issues.
  • Inspect the Wiring and Connectors: **Visual Inspection: Check the wiring harness and connectors associated with the driver’s seat switch. Look for any signs of damage, fraying, or corrosion.
  • **Connector Integrity: Ensure that all connectors are securely attached and free of dirt or moisture.
  • Test the Seat Switch: **Functionality Test: Use a multimeter to test the driver’s seat forward switch for continuity. Press the switch and check if it completes the circuit.
  • **Replace if Necessary: If the switch is faulty, replace it with a new one.
  • Check the Seat Control Module: **Module Functionality: If the switch is functioning correctly, the issue may lie within the seat control module. Check for any signs of damage or malfunction.
  • **Reprogramming: In some cases, the module may need to be reprogrammed or reset.
  • Inspect the Power Supply: **Voltage Check: Ensure that the seat is receiving the proper voltage. Use a multimeter to check the voltage at the seat switch and the control module.
  • **Fuses: Check the relevant fuses in the fuse box to ensure they are not blown.
  • Check Ground Connections: Ensure that the ground connections for the seat system are secure and free of corrosion. A poor ground can lead to circuit failures.
  • Perform a System Reset: Disconnect the vehicle’s battery for a few minutes to reset the system. Reconnect and see if the code reappears.
  • Consult the Service Manual: Refer to the vehicle’s service manual for specific wiring diagrams and troubleshooting procedures related to the seat control system.
  • Seek Professional Help: If the issue persists after performing the above steps, it may be best to consult a professional mechanic or an automotive technician who specializes in electrical systems. By following these steps, you should be able to identify and potentially resolve the issue related to the B1717 code. Always ensure safety precautions are taken when working with electrical systems in vehicles.

Leave a Comment

You must be logged in to post a comment.