B1772 – Seat Driver Backward Circuit Short To Ground

By Fixitfor.us |
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ODBII code B1772 indicates a short circuit in the driver seat’s backward movement circuit, meaning there is an electrical fault causing the circuit to connect to ground improperly.

The severity of ODBII code B1772 is moderate.

Common Causes For: B1771 Seat Driver Backward Circuit Short To Battery

  • Shorted wiring or connectors in the seat circuit.
  • Faulty seat position sensor.
  • Damaged or frayed wiring harness.
  • Malfunctioning seat control module.
  • Corroded connectors or terminals.
  • Grounding issues in the electrical system.

Common misdiagnosis for B1772 Seat Driver Backward Circuit Short To Ground

  • Faulty seat position sensor
  • Wiring issues or shorts in the seat harness
  • Malfunctioning seat control module
  • Issues with the power supply to the seat
  • Problems with the body control module (BCM)
  • Incorrectly installed or damaged seat components
  • Faulty connectors or terminals in the seat circuit

Common Troubleshooting Steps

The OBD-II code B1772 indicates a problem with the seat driver’s backward circuit, specifically a short to ground. This code is often related to the power seat system in vehicles equipped with power-adjustable seats. Here are some common troubleshooting steps to diagnose and resolve the issue:

  • Visual Inspection: **Wiring and Connectors: Inspect the wiring harness and connectors associated with the driver’s seat. Look for any signs of damage, fraying, or corrosion.
  • **Seat Mechanism: Check the seat mechanism for any obstructions or foreign objects that may be causing a short.
  • Check for Other Codes: Use an OBD-II scanner to check for any additional trouble codes that may provide more context or indicate related issues.
  • Test the Seat Switch: **Functionality: Test the seat switch for proper operation. If the switch is faulty, it may cause a short circuit.
  • **Continuity Test: Use a multimeter to check for continuity in the switch when it is activated.
  • Inspect the Seat Motor: **Motor Functionality: Test the seat motor to ensure it is functioning correctly. If the motor is shorted internally, it could cause the B1772 code.
  • **Resistance Test: Measure the resistance of the motor windings. If the resistance is too low, the motor may be shorted.
  • Check for Ground Issues: **Ground Connections: Ensure that all ground connections related to the seat system are secure and free of corrosion.
  • **Ground Circuit Test: Use a multimeter to test the ground circuit for continuity and proper voltage.
  • Inspect the Power Supply: **Voltage Test: Check the voltage supply to the seat motor and switch. Ensure that the correct voltage is present when the switch is activated.
  • **Fuses: Inspect any fuses related to the power seat system to ensure they are not blown.
  • Look for Shorts in the Wiring: **Wiring Harness: Trace the wiring harness from the seat switch to the motor and check for any shorts to ground along the way.
  • **Pinched Wires: Look for pinched or damaged wires that may be making contact with the vehicle chassis.
  • Clear the Code and Test Drive: After performing the above checks and repairs, clear the trouble code using the OBD-II scanner and take the vehicle for a test drive to see if the code returns.
  • Consult Service Manual: If the issue persists, consult the vehicle’s service manual for specific diagnostic procedures and wiring diagrams related to the power seat system.
  • Seek Professional Help: If you are unable to resolve the issue after following these steps, it may be best to consult a professional mechanic or automotive technician for further diagnosis. By following these troubleshooting steps, you should be able to identify and resolve the issue causing the B1772 code.

Leave a Comment

You must be logged in to post a comment.