b2355 driver seat front vertical position sensor circuit

B2355 Driver Seat Front Vertical Position Sensor Circuit

Definition: This code indicates a malfunction in the driver seat’s front vertical position sensor circuit. The sensor is responsible for detecting and communicating the vertical position of the driver’s seat to the vehicle’s control module.

b2355 – Driver Seat Front Vertical Position Sensor Circuit
– Severity: Moderate

Common Causes

b2355 – Driver Seat Front Vertical Position Sensor Circuit

• Common causes:
  1. Faulty driver seat front vertical position sensor
  2. Wiring issues in the circuit, such as short circuits or open circuits
  3. Poor electrical connection related to the sensor or wiring
  4. Corrosion in the sensor connector or wiring harness

 

Common Misdiagnosis

OBD2 Code: B2355
Description: Driver Seat Front Vertical Position Sensor Circuit
Common Misdiagnosis: Faulty seat motor instead of a malfunctioning position sensor.

 

Common Diagnostic Steps

html

OBD2 Code: B2355

Description: Driver Seat Front Vertical Position Sensor Circuit

Common Diagnostic Steps:

• Verify the code using an OBD-II scanner.
• Inspect the wiring and connectors for damage or corrosion in the driver seat front vertical position sensor circuit.
• Check for any blown fuses related to the seat adjustment system.
• Test the voltage and ground signals at the sensor connector using a multimeter.
• Examine the seat position sensor for physical damage or misalignment.
• If applicable, recalibrate or reset the seat position sensor using manufacturer-specific procedures.
• Replace faulty components as necessary, such as damaged wiring, connectors, or sensors.
• Clear the code and test drive to ensure it does not return.