B2367 Power Sliding Door Override Switch Input Circuit Short to Ground

OBD2 Code: B2367

Description: Power sliding door override switch input circuit short to ground.

Definition: This code indicates that there is a short to ground condition in the power sliding door override switch input circuit. This can prevent the power sliding door from operating correctly, as the system may interpret this fault as an intentional override or malfunction.

b2367: Power sliding door override switch input circuit short to ground

Severity: Moderate

Common Causes

B2367 – Power Sliding Door Override Switch Input Circuit Short to Ground

• Short circuit in the wiring harness
• Faulty power sliding door override switch
• Corrosion or poor connection at the switch or connector
• Water intrusion causing a short circuit

 

Common Misdiagnosis

OBD2 Code: B2367

Description: Power Sliding Door Override Switch Input Circuit Short to Ground

Common Misdiagnosis: Replacing the power sliding door motor or control module without checking the wiring and switch for shorts or damage.

 

Common Diagnostic Steps

html

OBD2 Code: B2367

Description: Power Sliding Door Override Switch Input Circuit Short to Ground

Common Diagnostic Steps:

• Verify the code using an OBD-II scanner and clear it to see if it returns.
• Inspect the power sliding door override switch for any visible damage or corrosion.
• Check the wiring harness connected to the override switch for signs of wear, damage, or short circuits.
• Test the continuity of the circuit from the switch to the control module using a multimeter.
• Examine all related fuses and relays associated with the power sliding door system.
• If applicable, consult vehicle-specific repair manuals for detailed wiring diagrams and component locations.
• If no issues are found in the wiring or components, consider testing or replacing the power sliding door control module.