b2503 right lamp low beam circuit failure
B2503 Right Lamp Low Beam Circuit Failure
OBD2 Code: B2503
Description: Right lamp low beam circuit failure indicates an issue with the electrical circuit responsible for powering the right-side low beam headlamp.
Definition: The OBD2 code B2503 is set when there is a malfunction detected in the circuitry of the right low beam headlamp. This could be due to a broken wire, poor connection, or a failed component within the circuit.
B2503 – Right Lamp Low Beam Circuit Failure
Typical severity: Moderate
Common Causes
b2503 – Right Lamp Low Beam Circuit Failure
Common Causes:
- Defective low beam bulb
- Faulty wiring or connections in the right lamp circuit
- Defective headlight switch
- Faulty body control module (BCM)
Common Misdiagnosis
OBD2 Code: B2503
Description: Right Lamp Low Beam Circuit Failure
Common Misdiagnosis: Replacing the bulb without checking for wiring issues or a faulty headlight relay.
Common Diagnostic Steps
html
OBD2 Code: B2503
Description: Right Lamp Low Beam Circuit Failure
- Check the right low beam bulb for any signs of damage or burnout.
- Inspect the wiring and connectors leading to the right low beam for any signs of corrosion, damage, or disconnection.
- Test the voltage at the right low beam connector to ensure proper power supply.
- Examine the fuse related to the right low beam circuit and replace if necessary.
- Use a multimeter to check for continuity in the circuit from the headlight switch to the right low beam bulb.
- If equipped, inspect and test the headlight relay associated with the right low beam circuit.
- Verify that there are no issues with grounding in the circuit by checking ground connections for cleanliness and tightness.
- If all else fails, consider testing or replacing the headlight switch itself as it may be faulty.