B2507 Right Lamp High Beam Circuit Failure

• OBD2 Code: B2507
• Description: Right lamp high beam circuit failure
• Definition: This code indicates a malfunction in the electrical circuit responsible for the operation of the right high beam headlamp. It typically points to issues such as a faulty bulb, wiring problems, or a defective control module.

B2507 – Right Lamp High Beam Circuit Failure
Typical Severity: Moderate

Common Causes

b2507 – Right Lamp High Beam Circuit Failure

Common causes:

• Faulty high beam bulb
• Defective high beam relay
• Wiring issues in the high beam circuit
• Faulty headlight switch

 

Common Misdiagnosis

OBD2 Code: B2507

Description: Right Lamp High Beam Circuit Failure

Common Misdiagnosis: Replacing the high beam bulb without checking for wiring issues or a faulty headlight switch.

 

Common Diagnostic Steps

html

OBD2 Code: B2507

Description: Right Lamp High Beam Circuit Failure

• Check the high beam bulb on the right side for any signs of damage or burnout.
• Inspect the wiring and connectors leading to the right high beam lamp for any signs of corrosion, damage, or disconnection.
• Test the fuse related to the high beam circuit to ensure it is not blown.
• Use a multimeter to check for proper voltage at the right high beam connector when the high beams are activated.
• If equipped, inspect and test the headlight relay associated with the high beam circuit.
• Examine and test the headlight switch for proper operation and continuity.
• If all components appear functional, consider checking for any fault codes in other modules that might indicate a broader electrical issue.