C0041 Brake Pedal Switch B

OBD2 Code: C0041

Description: Brake Pedal Switch B Circuit Malfunction

Definition: This code indicates that there is a malfunction in the circuit of the brake pedal switch labeled as “B.” The brake pedal switch is responsible for sending signals to various systems, such as the ABS and cruise control, indicating whether the brake pedal is pressed or not. A fault in this circuit can lead to issues with these systems functioning properly.

C0041 – Brake Pedal Switch “B” Circuit

Description: The powertrain control module (PCM) detects a malfunction in the brake pedal switch “B” circuit.

Severity: Moderate

Common Causes

C0041 – Brake Pedal Switch B

Description: The OBD2 code C0041 indicates a problem with the brake pedal switch B circuit.

Common Causes:

• Faulty brake pedal switch B
• Short or open circuit in the wiring related to brake pedal switch B
• Corroded connectors in the brake pedal switch B circuit
• Software issues in the vehicle’s control module related to brake pedal switch B

 

Common Misdiagnosis

html

OBD2 Code: C0041

Description: Brake Pedal Switch B

Common Misdiagnosis: Replacing the brake pedal switch without checking for wiring issues or connector problems.

 

Common Diagnostic Steps

html

OBD2 Code: C0041

Description: Brake Pedal Switch B Circuit Malfunction

Common Diagnostic Steps:

• Check for any additional trouble codes that may be present and address those first.
• Inspect the brake pedal switch and its wiring for signs of damage, corrosion, or disconnection.
• Test the brake pedal switch using a multimeter to ensure it is functioning correctly.
• Verify that the brake lights operate properly when the pedal is pressed.
• Examine related fuses and replace if necessary.
• If equipped, check the operation of the cruise control system as it may be affected by this fault.
• Consult vehicle-specific repair manuals for further diagnostic procedures if needed.