C1422 Master Cylinder Pressure Sensor Zero Point High Malfunction

OBD2 Code: C1422

Description: Master Cylinder Pressure Sensor Zero Point High Malfunction

Definition: This code indicates that the zero point of the master cylinder pressure sensor is higher than expected, which may affect the vehicle’s braking system performance. It typically involves issues with the brake pressure sensor or related components in the anti-lock braking system (ABS).

c1422 – Master Cylinder Pressure Sensor Zero Point High Malfunction

Typical Severity: Critical

Common Causes

C1422 – Master Cylinder Pressure Sensor Zero Point High Malfunction

Common Causes:

• Faulty master cylinder pressure sensor
• Low brake fluid level
• Brake system leaks
• Wiring or connector issues in the sensor circuit
• Software glitches in the vehicle’s control module

 

Common Misdiagnosis

OBD2 Code: C1422

Description: Master Cylinder Pressure Sensor Zero Point High Malfunction

Common Misdiagnosis: Replacing the master cylinder pressure sensor without checking for wiring issues or connector problems.

 

Common Diagnostic Steps

html

OBD2 Code: C1422

Description: Master Cylinder Pressure Sensor Zero Point High Malfunction

• Check for any stored codes and freeze frame data to understand the conditions under which the code was set.
• Inspect the master cylinder pressure sensor and its wiring for damage, disconnection, or corrosion.
• Verify that the brake fluid level is within specifications and there are no leaks in the system.
• Use a scan tool to monitor live data from the master cylinder pressure sensor to check for abnormal readings.
• Perform a zero point calibration of the master cylinder pressure sensor using an appropriate diagnostic tool if necessary.
• If applicable, update or reprogram the vehicle’s ECU/PCM with the latest software version available from the manufacturer.
• If all checks pass but the issue persists, consider replacing the master cylinder pressure sensor after confirming it is faulty.