C1423 Master Cylinder Pressure Sensor Zero Point Low Malfunction

• OBD2 Code: C1423
• Description: Master Cylinder Pressure Sensor Zero Point Low Malfunction
• Definition: This code indicates that the master cylinder pressure sensor is reading a zero point that is lower than expected, which may affect the vehicle’s braking system performance.

C1423 – Master Cylinder Pressure Sensor Zero Point Low Malfunction

Typical Severity: Critical

Common Causes

c1423 – Master Cylinder Pressure Sensor Zero Point Low Malfunction

Common Causes:

• Faulty master cylinder pressure sensor
• Low brake fluid level
• Wiring issues in the circuit of the master cylinder pressure sensor
• Corrosion or poor connection at the sensor terminals
• Software glitches in the vehicle’s control module

 

Common Misdiagnosis

html

OBD2 Code: C1423

Description: Master Cylinder Pressure Sensor Zero Point Low Malfunction

Common Misdiagnosis: Replacing the master cylinder pressure sensor without checking for wiring issues or connector problems.

 

Common Diagnostic Steps

html

OBD2 Code: C1423

Description: Master Cylinder Pressure Sensor Zero Point Low Malfunction

• Check for any stored codes and freeze frame data to understand the conditions under which the code was set.
• Inspect the master cylinder pressure sensor wiring and connectors for damage, corrosion, or disconnection.
• Test the voltage and ground signals at the master cylinder pressure sensor using a multimeter.
• Verify that the brake fluid level is within specifications and there are no leaks in the system.
• Perform a zero point calibration of the master cylinder pressure sensor if applicable.
• If necessary, replace the faulty master cylinder pressure sensor with a new one.
• Clear all codes and test drive to ensure proper operation and that no codes return.