p0364 reserved
P0364 Reserved
Description: Camshaft Position Sensor “B” Circuit Intermittent (Bank 1)
Definition: The P0364 code indicates that the Powertrain Control Module (PCM) has detected an intermittent signal from the camshaft position sensor “B” for bank 1. This can affect engine timing and performance.
P0364 – Camshaft Position Sensor “A” Circuit Intermittent (Bank 1)
Severity: Moderate
Common Causes
P0364 – Camshaft Position Sensor “A” Circuit Intermittent (Bank 1)
Common causes of P0364 OBD-II code:
- Faulty camshaft position sensor
- Camshaft position sensor harness is open or shorted
- Camshaft position sensor circuit poor electrical connection
- Engine mechanical problems
- Timing belt or chain stretched or jumped
Common Misdiagnosis
OBD2 Code: P0364
Description: Camshaft Position Sensor “B” Circuit Intermittent (Bank 1)
Common Misdiagnosis: Replacing the camshaft position sensor without checking for wiring issues or connector problems.
Common Diagnostic Steps
OBD2 Code: P0364
Description: Reserved
Common Diagnostic Steps:
- Verify the code using an OBD2 scanner.
- Check for any additional trouble codes that may be present.
- Inspect the wiring and connectors related to the camshaft position sensor circuit.
- Test the camshaft position sensor for proper operation using a multimeter or oscilloscope.
- Examine the timing belt or chain for wear or misalignment.
- Ensure that all engine mechanical components are in good condition and properly timed.
- If necessary, replace faulty components such as sensors, wiring, or connectors.
- Clear the code and test drive to see if it returns.